
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X25-20B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 25mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X25-20B is a double-acting JIS compact cylinder with a 25 mm full stroke and a 20 mm external adjustment window. An external threaded stop with a lock nut restricts the extend end position, giving a usable extend range of 5 to 25 mm. The retract stroke remains completely unaffected by this mechanism.
This unit features a male M14x1.5 piston rod end for direct load coupling, a 16 mm rod diameter, and a PT1/8 port. It includes fixed elastomer NBR bumpers at both ends for end-of-stroke deceleration rather than adjustable air cushions. The body retains magnetic-switch grooves, though this specific configuration ships without the internal magnet. Operating pressure spans 0.15 to 1.0 MPa, with a proof pressure of 1.5 MPa.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X25-20B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 25 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×25 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on a machining fixture during product changeovers without machining new stop collars or swapping cylinders.
Fine-tune the extend position of a transfer line diverter gate to accommodate varying package widths directly on the conveyor frame.
Adjust the end-of-stroke contact point on a packaging machine flap folder to test and set the optimal folding depth for different carton sizes.
If your application requires a constant extend distance and never needs on-the-fly tweaks, a fixed-stroke ACQ cylinder will suffice. To order, confirm the 40 mm bore, 25 mm full stroke, 20 mm adjustment window, the male M14x1.5 rod thread, and that no internal magnet is required.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The usable extend range is 5 to 25 mm.
An M12x1.25 threaded stop with a lock nut limits the extend distance without altering piston area, so force remains unchanged. The cylinder uses fixed elastomer bumpers for deceleration, not adjustable air cushions. Note that a plain ACQ-type cylinder does not hold its load on air loss; use an external rod lock for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.