
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X35-40S is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 35mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X35-40S is a double-acting JIS compact cylinder with a 40mm bore and 35mm full stroke. It features an external threaded stop with a lock nut on the rod-end side, allowing you to fine-tune the extend end position on the machine. The usable extend range runs from 0mm up to 35mm, while the retract stroke remains completely unaffected.
The cylinder uses a fixed elastomer bumper at each end for deceleration and includes a built-in piston magnet (-S) for position sensing. The standard port size is PT1/8, and the piston rod measures 16mm in diameter.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X35-40S |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 35 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×35 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the extend position from 0 to 35mm on a CNC lathe loader without machining new spacer rings for different part lengths.
Quickly alter the folding arm end-point during packaging line size changeovers, using the external M12x1.25 stopper to set the exact 35mm travel.
Test multiple engagement depths on an assembly press by adjusting the extend stroke in the field, relying on the fixed elastomer bumper to absorb end impacts.
This 40mm model fits squarely in the middle for medium-force tasks. If your end position never varies, a fixed-stroke ACQ cylinder is sufficient; choose this ACQJ variant only when setup-varying stops or product-changeover positions require on-the-fly adjustment. When ordering, confirm the 40mm bore, 35mm full stroke, 40mm adjustable window, the -S magnet, and the default female M8x1.25 rod thread.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The usable extend range is 0-35mm (35mm full stroke minus the 40mm window). The retract stroke is unaffected. The external adjuster uses an M12x1.25 thread.
No, the external stop limits stroke length only; it does not alter piston area, so force remains identical to a standard ACQ. The cylinder uses a fixed elastomer bumper, not an adjustable air cushion. Note that a plain ACQ does not hold its load on air loss; for a fail-safe hold, use an external rod lock or pilot-operated check valve. The -S magnet works with reed or solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.