
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X40-20B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 40mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X40-20B is a double-acting JIS compact cylinder featuring an external threaded stop and lock nut that limits the extend end position. With a 40mm full stroke and a 20mm adjustment window, you can fine-tune the usable extend range from 20mm up to 40mm directly on the machine. The retract stroke remains completely unaffected by this mechanism.
Because the adjustment only alters travel length and not the piston area, the output force stays identical to a standard ACQ of the same bore. This variant includes a male M14x1.5 rod-end thread for direct load coupling, a PT1/8 port, and fixed NBR elastomer bumpers at both ends to absorb end-of-stroke impact.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X40-20B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 40 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×40 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping extension on CNC machining fixtures during product changeover, avoiding the need to manufacture custom spacer blocks for each part.
Adjust the tucking arm reach on a packaging line to accommodate varying carton depths, setting the extend endpoint precisely between 20mm and 40mm.
Establish trial end positions for light pressing operations on an automated assembly line, tweaking the stroke length on the machine without replacing hardware.
Choose this adjustable model if your fixture setup or product changeover requires varying extend endpoints without swapping cylinders; a fixed-stroke ACQ is sufficient if the end position never changes. Confirm your ordering essentials: 40mm bore, 40mm full stroke, 20mm window, male rod thread (-B), and whether you need the magnet (-S) for position sensing.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The full stroke is 40mm with a 20mm adjustment window, providing a usable extend range of 20-40mm.
An external M12x1.25 threaded stop with a lock nut mechanically limits the extend length, meaning force remains identical to a standard ACQ since piston area is unchanged. The cylinder uses fixed elastomer bumpers rather than adjustable air cushions, and it will not hold a load on air loss; use an external rod lock for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.