
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X45-20B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 45mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X45-20B is a double-acting JIS compact cylinder featuring an external male-threaded stop with a lock nut. This mechanism limits the extend end position, providing a usable extend range of 25 to 45 mm from the 45 mm full stroke. The retract stroke remains completely unaffected. A PT1/8 port and 16 mm rod drive the piston.
This unit includes a male M14x1.5 rod-end thread for direct load coupling. It uses fixed NBR elastomer bumpers at each end for deceleration rather than adjustable air cushions. The body features sensor grooves, though this specific SKU ships without a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X45-20B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 45 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact extend position from 25 to 45 mm on CNC fixtures to accommodate varying raw material thicknesses without machining new stop blocks.
Retune the extend endpoint rapidly on packaging lines during format size changes, using the external M12x1.25 adjuster thread to set the new resting point.
Stepping down to a 32 mm bore drops push to 402.1 N, while moving up to a 50 mm bore increases it to 981.8 N. If your extend position never varies, a fixed-stroke ACQ cylinder is sufficient. When ordering, confirm the 45 mm full stroke, the 20 mm adjustment window, the male M14x1.5 rod thread, and whether you need the -S magnet option for sensing.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
At 0.5 MPa, the push force is 628.3 N and the pull force is 527.8 N. At 0.7 MPa, the push force is 879.6 N, with a maximum push of 128 kgf at 1.0 MPa. The full stroke is 45 mm, and the external adjuster allows the extend stroke to be shortened by up to 20 mm, yielding a usable extend range of 25 to 45 mm.
The external threaded stop with a lock nut limits only the extend stroke; the retract stroke and the piston area remain unchanged, so force stays identical to a standard ACQ. The cylinder uses fixed elastomer bumpers for end-of-stroke deceleration. It does not hold the load on air loss, so an external rod lock or pilot-operated check valve is recommended for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.