
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X50-40B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 50mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X50-40B is a double-acting JIS compact cylinder featuring an external adjustable extend stop. An external M12x1.25 threaded rod with a lock nut lets you fine-tune the extend end position on the machine without swapping parts. This -40 window means the usable extend range runs from 10 mm up to the full 50 mm stroke, while the retract stroke remains completely unaffected.
Because the piston area is unchanged, the force output is identical to a standard ACQ of this bore. This specific variant includes a male M14x1.5 piston rod end for direct load coupling, fixed elastomer bumpers at both ends for end-of-stroke deceleration, and a PT1/8 port. The body retains sensor grooves, though this unit ships without a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X50-40B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 50 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact extend stop from 10 to 50 mm on a CNC machining fixture to accommodate varying part thicknesses without fabricating new spacer blocks.
Speed up product changeovers on an automated assembly line by turning the external M12x1.25 adjuster to set new extend end positions for different product sizes.
Establish trial end positions on a packaging machine carton sealer, testing different extend lengths to find the optimal pressing depth before locking the nut.
Choose this adjustable model when you need on-machine end-position tuning during setup or product changeovers; if the exact 50 mm end position is fixed and never varies, a standard ACQ40X50 will suffice. Confirm ordering essentials: 40 mm bore, 50 mm full stroke, 40 mm adjustment window, male rod thread (-B), and no magnet.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The force is identical to a standard ACQ40 cylinder because the adjuster only changes stroke length, not piston area. With a full stroke of 50 mm and a 40 mm adjustment window, the usable extend range is 10-50 mm.
An external M12x1.25 threaded stop with a lock nut limits how far the rod extends, allowing you to shorten the extend stroke by up to 40 mm without changing parts; the retract stroke is unaffected. This model ships without a sensor magnet, though the body retains sensor grooves. Fixed elastomer bumpers handle end-of-stroke deceleration, and for fail-safe load holding on air loss, an external rod lock is required.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.