
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X50-50B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 50mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X50-50B is a double-acting JIS compact cylinder featuring an external male-threaded piston rod (M14x1.5) and an adjustable extend stop. An external M12x1.25 threaded screw with a lock nut limits how far the rod extends, yielding a usable extend range of 0-50 mm from the 50 mm full stroke. The retract stroke remains completely unaffected by this mechanism.
The unit relies on a fixed NBR elastomer bumper at each end for deceleration rather than an adjustable air cushion. The body includes sensor grooves, though this specific SKU ships without a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X50-50B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 50 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping depth on a CNC fixture during tooling setup without machining new spacers or swapping cylinders.
Adjust the extend reach of a packaging line diverter gate on the fly to accommodate different carton widths.
Establish trial end positions for a light-duty assembly press, testing multiple stroke depths before locking the stop nut.
If your end position never varies, a fixed-stroke ACQ cylinder is sufficient and simpler. To order, confirm the 40 mm bore, 50 mm full stroke, 50 mm adjuster window, the male rod thread (-B), and whether you need a magnet (-S) for position sensing.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The usable extend range is 0-50 mm (50 mm full stroke minus the 50 mm window), while the retract stroke stays fixed. The external adjuster uses an M12x1.25 thread.
No, the adjuster changes only the stroke length, not the piston area, so force is unchanged. Deceleration is handled by a fixed NBR elastomer bumper at each end, not an adjustable air cushion. For high-speed or high-energy loads, use an external shock absorber. Also, a plain ACQ-type cylinder will not hold its load on air loss; use an external rod lock for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.