
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X60-10B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 60mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X60-10B is a double-acting JIS compact cylinder with a 60mm full stroke and a male M14x1.5 piston rod. An external M12x1.25 threaded stop and lock nut lets you fine-tune the extend end position on the machine, providing a usable extend range of 50 to 60mm. The retract stroke remains completely unaffected by this adjustment.
The body uses a fixed NBR elastomer bumper at each end for end-of-stroke deceleration rather than an adjustable air cushion. It operates at 30-500mm/s and features sensor grooves, though this specific SKU ships without a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X60-10B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 60 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on a CNC machining center during setup. The external stop allows 50-60mm extend positioning to accommodate varying part heights without swapping cylinders.
Adjust the product push-off distance on a packaging line when switching carton sizes. The lock nut secures the new extend endpoint rapidly to minimize line downtime.
Test different insertion depths on an automated assembly press. You can tune the extend stroke by up to 10mm to find the optimal pressing position before finalizing the mechanical setup.
If your machine never needs end-position tuning, a fixed-stroke ACQ cylinder is simpler and suffices. When ordering this adjustable version, confirm the 40mm bore, 60mm full stroke, 10mm window, the male rod thread, and whether you need the -S magnet option for electronic or reed switch sensing.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The usable extend range is 50-60mm (60mm full stroke minus the 10mm window).
The M12x1.25 threaded stop with lock nut mechanically limits the extend distance without changing the piston area, so force remains unchanged. The cylinder uses fixed NBR elastomer bumpers, not adjustable air cushions. It will not hold a load on air loss; use an external rod lock or pilot-operated check valve for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.