
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X70-20 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 70mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X70-20 is a double-acting JIS compact cylinder featuring an external threaded stop with a lock nut on the rod-end side. This mechanism limits the extend travel, allowing you to fine-tune the usable extend range from 50 up to 70mm directly on the machine without swapping parts. The retract stroke remains completely unaffected by this adjustment.
The cylinder body incorporates fixed NBR elastomer bumpers at both ends for end-of-stroke deceleration rather than adjustable air cushions. It also features integrated magnetic-switch grooves, though this specific configuration ships without the magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X70-20 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 70 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping extension on a CNC lathe fixture during initial setup, using the external stop to prevent over-travel into the chuck jaws.
Quickly reposition a pneumatic diverter gate on a packaging conveyor to handle a new carton width by turning the adjuster nut rather than replacing hardware.
Test different pressing depths for a bearing insertion station by adjusting the extend end-point within the 50-70mm window before finalizing the cycle.
If your application requires a fixed end position that never varies, a standard ACQ cylinder will suffice and saves the adjustment step. To order this adjustable model correctly, confirm the 40mm bore, 70mm full stroke, 20mm window, female M8x1.25 rod-end thread, and whether you need the S magnet suffix for position sensing.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The usable extend range is 50-70mm (a 70mm full stroke minus the 20mm window). The port size is PT1/8 and the external adjuster thread is M12x1.25.
No, the threaded stop only changes the extend stroke length, so the force remains identical to a standard ACQ. The cylinder uses fixed NBR elastomer bumpers for deceleration, not an adjustable air cushion or load-holding brake. For fail-safe load holding on air loss, an external rod lock is required.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.