
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X70-20B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 70mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X70-20B is a double-acting JIS compact cylinder featuring an external male-threaded stop with a lock nut that restricts the EXTEND end position. You can fine-tune the usable extend stroke anywhere from 50mm up to the full 70mm directly on your equipment, while the RETRACT stroke remains fixed and unaffected. Because the piston area is unchanged, the output force is identical to a standard ACQ of the same bore.
This specific configuration includes a male-thread (M14x1.5) piston rod end for direct load coupling, a Ø16mm rod, and PT1/8 ports. It ships without a magnet, though the body retains magnetic-switch grooves for future sensing upgrades. Deceleration relies on a fixed NBR elastomer bumper at each end, not an adjustable air cushion.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X70-20B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 70 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Set precise extend stops on a milling fixture to accommodate different raw casting widths without swapping out the entire cylinder assembly.
Quickly reposition the extend end position on a packaging line when transitioning between varying carton sizes, using the lock nut to secure the new 50-70mm range.
Dial in the exact extension point during laboratory testing equipment setup to find the optimal clamping distance before finalizing the mechanical layout.
Stepping down to a 32mm bore drops the push to 402.1N, whereas moving up to a 50mm bore increases it to 981.8N. If your application never requires varying the end position, a fixed-stroke ACQ40X70 will achieve the same thrust. When ordering, confirm the 40mm bore, 70mm full stroke, 20mm adjuster window, the male rod thread, and that no magnet (-S) is required.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The maximum push force is 128kgf at 1.0MPa. The full stroke is 70mm, but the external M12x1.25 adjuster allows the extend stroke to be shortened by up to 20mm, giving a usable extend range of 50-70mm.
No, the external threaded stop only changes the extend stroke length, meaning the force remains identical to a standard ACQ. Deceleration is handled by a fixed elastomer bumper at each end, not an adjustable air cushion. Note that a plain cylinder will not hold a load on air loss; for fail-safe holding, an external rod lock or pilot-operated check valve is required.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.