
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X70-30 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 70mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X70-30 is a double-acting, double-rod JIS compact cylinder featuring an external extend-stroke adjuster. A threaded stop with a lock nut allows you to fine-tune the forward end position directly on your equipment. With a 70mm full stroke and a 30mm adjustment window, the usable extend range spans 40 to 70mm. The retract movement remains completely unaffected by this mechanism.
The unit incorporates fixed NBR elastomer bumpers at both ends rather than adjustable air cushions. It features a 16mm piston rod, a female M8x1.25 rod-end thread, and PT1/8 ports. Note that this specific configuration ships without a magnet, though the body retains sensor grooves for external reed or solid-state switches.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X70-30 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 70 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact 40 to 70mm extend stop on CNC load-and-unload stations to absorb slight fixture height variations without machining new spacers.
Adjust the end-of-stroke stop on packaging lines when switching between different carton sizes, ensuring precise pressing or folding depth.
Safely trial different extended positions on new robotic gripper assemblies, finding the optimal reach before locking down the final mechanical stop.
If the forward position is fixed and never varies, a standard ACQ40 cylinder will suffice without the adjuster hardware. When ordering this adjustable variant, confirm the 40mm bore, 70mm full stroke, 30mm window, female rod thread, and that no magnet (-S) is required.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The usable extend range is 40-70mm (70mm full stroke minus the 30mm window).
An external M12x1.25 threaded stop with a lock nut limits the forward extension, changing stroke length only without altering piston area or force. The retract stroke is unaffected. Deceleration is handled by fixed NBR elastomer bumpers at each end, not adjustable air cushions, so external shock absorbers may be needed for high-energy loads.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.