
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X70-30S is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 70mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X70-30S is a double-acting JIS compact cylinder with a 40mm bore and a 70mm full stroke. An external threaded stop with a lock nut limits the extend end position, providing a usable forward range of 40 to 70mm. You can fine-tune the forward endpoint directly on the machine without swapping parts, while the retract stroke remains completely unaffected.
Because the adjustment only alters travel length and not piston area, output force is identical to a standard ACQ of this size. The unit pushes 628.3N and pulls 527.8N at 0.5MPa. It features a 16mm piston rod, an M8x1.25 female rod-end thread, and a PT1/8 port. Fixed NBR elastomer bumpers handle end-of-stroke deceleration, and the built-in magnet (-S) supports both reed and solid-state sensors.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X70-30S |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 70 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on CNC fixtures. The external stop allows operators to shift the extend endpoint by up to 30mm when transitioning between raw material thicknesses.
Adapt sorting or diverting gates on a packaging line. The adjustable forward stop lets you reposition the rod end rapidly for different carton sizes without changing the cylinder body.
Set trial end positions for pressing bearings or pins.
If your setup never requires end-position adjustments, a fixed-stroke ACQ cylinder provides the exact same power in a simpler package. To order this adjustable version, confirm the 40mm bore, 70mm full stroke, 30mm window, the -S magnet, and your required rod-end thread type.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The maximum push is 128kgf at 1.0MPa. The full stroke is 70mm, but the external adjuster allows you to shorten the extend stroke by up to 30mm, creating a usable forward range of 40 to 70mm.
The adjuster uses an M12x1.25 threaded stop with a lock nut to mechanically limit how far the rod extends, without changing the piston area or reducing the output force. Deceleration is handled by fixed NBR elastomer bumpers at both ends, not adjustable air cushions. The included -S magnet works seamlessly with both reed and electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.