
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X70-40B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 70mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X70-40B is a double-acting JIS compact cylinder featuring a 70mm full stroke and an external M12x1.25 threaded stop with a lock nut. This mechanism lets you fine-tune the extend end position on the machine, providing a usable forward travel range of 30 to 70mm. The return stroke remains completely unaffected by this adjustment.
Equipped with a male M14x1.5 rod end, it couples directly to your payload. The body incorporates integrated magnetic-switch grooves, though this specific configuration ships without a magnet. Deceleration relies on a fixed NBR elastomer bumper at each end rather than an adjustable air cushion. Operating pressure spans 0.15 to 1.0MPa, with a proof rating of 1.5MPa, while cycle speeds of 30-500mm/s are supported.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X70-40B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 70 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on a CNC fixture by turning the external stop, accommodating different part heights without swapping cylinders.
Rapidly adjust the extend length to match new carton dimensions on a packaging line, using the lock nut to secure the new 30-70mm position.
Establish trial end positions for pressing bearings, allowing operators to find the perfect seating depth on the machine floor without custom spacers.
For this 40mm bore, the maximum standard full stroke is 100mm. Choose this specific 70-40 variant when your fixture setup requires variable end positions within a 30 to 70mm window. If a fixed forward distance is always required, a standard ACQ cylinder will suffice. Confirm your ordering essentials: 40mm bore, 70mm full stroke, 40mm adjuster window, male M14x1.5 rod thread, and no magnet.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The usable extend range is 30-70mm (70mm full stroke minus the 40mm window).
An external M12x1.25 threaded screw with a lock nut limits the forward travel distance without altering piston area, so thrust remains unchanged. Deceleration uses a fixed NBR elastomer bumper, not an adjustable air cushion. This plain cylinder does not hold its load on air loss; use an external rod lock for fail-safe positioning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.