
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X75-10 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 75mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X75-10 is a double-acting JIS compact cylinder featuring a 75mm full stroke and an external extend stop with a lock nut. By turning the M12x1.25 adjuster screw, you can fine-tune the extend end position on the machine, yielding a usable extend range of 65-75mm without swapping parts. The retract stroke remains completely unaffected.
The 40mm bore uses a PT1/8 port and a 16mm rod with an M8x1.25 female thread end. Fixed NBR elastomer bumpers absorb impact at both ends, and the body includes sensor grooves for adding reed or solid-state switches later.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X75-10 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 75 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Adjust the 65-75mm extend position on a CNC machining fixture to accommodate raw material blanks of slightly varying lengths without manufacturing custom spacers.
Fine-tune the extend reach of a diverter arm on a packaging conveyor during product format changeovers to precisely guide different carton widths.
Set trial end positions on an assembly press to gently seat bearings, relying on the fixed elastomer bumper to decelerate the tooling near the stroke end.
A fixed-stroke ACQ is sufficient if your extend position never varies. When ordering, confirm the 75mm full stroke, 10mm adjuster window, female rod thread, and whether you need the -S magnet option for switch sensing.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The 75mm full stroke can be shortened by up to 10mm via the external stop, giving a usable extend range of 65-75mm.
The external M12x1.25 threaded stop with lock nut physically limits how far the rod extends, shortening only the extend stroke. The retract stroke remains unchanged. Force is not reduced. Note that a plain ACQ-type does not hold its load on air loss; for fail-safe holding, use an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.