
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X90-10B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 90mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The ACQJ40X90-10B is a double-acting JIS compact cylinder featuring a male-thread piston rod end (M14x1.5) that couples directly to your load. It incorporates an external M12x1.25 threaded stop with a lock nut on the extend side, allowing on-machine end-position tuning without swapping components. You can shorten the forward stroke by up to 10 mm, yielding a usable extend range of 80 to 90 mm, while the retract stroke remains completely unaffected.
The unit relies on a fixed NBR elastomer bumper at each end for deceleration rather than an adjustable air cushion. Although this specific configuration ships without a magnet, the body retains magnetic-switch grooves for adding sensors later.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X90-10B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 90 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact 80 to 90 mm clamp extension on a CNC fixture to accommodate varying raw material thicknesses without machining custom spacer blocks.
Fine-tune the pressing end position on a packaging line during product changeover, ensuring consistent flap folding depth across different box sizes.
Establish trial end positions for pressing bearings on an assembly line, safely testing the 10 mm adjustment window before finalizing the mechanical stops.
If your application never requires stroke length changes, a fixed-stroke ACQ series cylinder will achieve the same clamping force. To order the ACQJ variant correctly, confirm the 40 mm bore, 90 mm full stroke, 10 mm adjuster window, the male rod thread, and whether you need the S magnet option for electronic or reed sensors.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The full stroke is 90 mm with a 10 mm adjustable window, giving a usable extend range of 80 to 90 mm. Operating pressure spans 0.15 to 1.0 MPa.
The external M12x1.25 threaded stop limits only the extend stroke, leaving retract unchanged. Force remains identical to a standard ACQ because the piston area is unaltered. Deceleration relies on a fixed elastomer bumper, and since a plain ACQ-type does not hold its load on air loss, you should add an external rod lock or pilot-operated check valve for fail-safe positioning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.