
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X90-50B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 90mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X90-50B is a double-acting JIS compact cylinder with a male-thread piston rod end (M14x1.5) that couples directly to your load. It features an external stop with a lock nut on the extend side, allowing you to fine-tune the end position on the machine without swapping components. The usable extend range is 40-90 mm, as the 50 mm window shortens the 90 mm full stroke, while the retract stroke remains completely unaffected.
The unit uses a fixed NBR elastomer bumper at each end for deceleration rather than an adjustable air cushion. It operates at 30-500 mm/s, accepts PT1/8 porting, and includes sensor grooves, though this specific configuration ships without a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X90-50B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 90 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact extend position during product changeovers on a CNC machining fixture without machining new stop collars.
Adjust the extend stroke on a packaging line to accommodate varying box heights while maintaining consistent sealing pressure.
Set precise travel limits for pressing bearings on an automated assembly machine, tweaking the depth on the fly for different part batches.
When sizing this 40 mm bore, dropping down to a 32 mm bore reduces the push force to 402.1 N at 0.5 MPa, while stepping up to a 50 mm bore increases it to 981.8 N. If your end position never varies, a fixed-stroke ACQ cylinder is sufficient. To order, confirm the 40 mm bore, 90 mm full stroke, 50 mm adjuster window, the male rod thread option, and whether you need the S magnet for solid-state or reed switches.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The full stroke is 90 mm, but the external M12x1.25 adjuster allows you to shorten the extend stroke by up to 50 mm, yielding a usable extend range of 40-90 mm.
The threaded stop with a lock nut limits only the extend end position; it changes stroke length but not piston area, so force is unchanged. The retract stroke is unaffected. Deceleration relies on a fixed elastomer bumper, not an adjustable air cushion, so for high energy loads you should add an external shock absorber.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.