
The AirTAC ACQJ80-100 Adjustable Compact Cylinder ACQJ100X175-100B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø100mm bore and 175mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The ACQJ100X175-100B is a double-acting, double-rod JIS compact cylinder built for applications requiring precise extend-position tuning. It features an external M27x2.0 threaded stop with a lock nut that limits the forward stroke. You can adjust the usable extend range from 75mm up to the full 175mm directly on the machine, while the retract stroke remains completely unaffected. This specific configuration includes a male M26x1.5 piston rod end for direct load coupling and is manufactured as a long-stroke variant, exceeding the 100mm standard maximum for this bore.
Because the adjuster restricts travel length without altering the piston area, the output force remains identical to a standard ACQ100 cylinder. The body incorporates fixed NBR elastomer bumpers at both ends for end-of-stroke deceleration rather than adjustable air cushions. Sensor grooves are machined into the body, though this specific SKU ships without a magnet.
| Model | Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ100X175-100B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Full stroke | 175 mm |
| Adjuster thread | M27×2.0 |
| Port size | PT3/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M20×2.5 (F) / M26×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact 75 to 175mm extend stop during heavy press setups without machining new spacers, allowing rapid product-changeover on the line.
Securely clamp oversized machining fixtures by fine-tuning the forward travel on the fly, compensating for varying workpiece thicknesses up to the 175mm limit.
Modify the stopping point for different pallet widths on a conveyor system, utilizing the 100mm adjustment window to adapt the end position instantly.
If your end-position requirement is fixed and never changes, a standard made-to-order ACQ100 long-stroke cylinder will accomplish the same task without the external hardware. For ordering, verify the 100mm bore, 175mm full stroke, 100mm adjustment window, the male M26x1.5 rod thread, and confirm that no magnet is required for your sensors.
AirtacDistr lists every ACQJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj100-adjustable-cylinder
Quick checklist
This cylinder has a 100mm bore and a 175mm full stroke. The adjustable extend window is 100mm, giving a usable extend range of 75-175mm. The port size is PT3/8.
An external M27x2.0 threaded stop with a lock nut limits the forward travel, shortening the extend stroke without changing the piston area, so force is unchanged. The retract stroke is unaffected. Deceleration relies on fixed NBR elastomer bumpers, not adjustable air cushions. For high-speed impacts, add an external shock absorber. This cylinder does not hold its load on air loss; use an external rod lock or pilot-operated check valve for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.