
The AirTAC ACQJ80-100 Adjustable Compact Cylinder ACQJ80X150-100B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø80mm bore and 150mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The ACQJ80X150-100B is a double-acting JIS compact cylinder featuring an external male-thread piston rod (M22x1.5) and a long 150 mm stroke. A threaded stop with a lock nut limits the extend end position, providing a usable extend range of 50 to 150 mm. The retract stroke remains completely unaffected. Because the piston area is unchanged, the output force is identical to a standard ACQ of this bore.
The body includes magnetic-switch grooves, though this specific unit ships without a magnet. It uses a PT3/8 port, a Ø25 mm rod, and fixed NBR elastomer bumpers at each end rather than adjustable air cushions. The external adjuster utilizes an M20x1.5 thread.
| Model | Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X150-100B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Full stroke | 150 mm |
| Adjuster thread | M20×1.5 |
| Port size | PT3/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M16×2.0 (F) / M22×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×150 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in exact press depths for varying bearing sizes on an automotive assembly line using the external M20x1.5 stop without swapping cylinders.
Adjust the extend position on packaging conveyors to accommodate different carton lengths rapidly during format changes.
Test clamping locations on new machining fixtures and lock the final position with the nut to prevent drift during production runs.
A fixed-stroke ACQ suffices if your end position never varies. This long-stroke 150 mm unit exceeds the 100 mm standard maximum for bore 80, making it a made-to-order item. Confirm your ordering essentials: 80 mm bore, 150 mm full stroke, 100 mm window, male rod thread B, and no magnet.
AirtacDistr lists every ACQJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj80-adjustable-cylinder
Quick checklist
The usable extend range is 50-150 mm (150 mm full stroke minus the 100 mm window). The retract stroke is unaffected.
The external M20x1.5 threaded stop with lock nut limits the extend distance only, meaning the piston area and force remain unchanged. Fixed NBR elastomer bumpers decelerate the load at stroke ends; this cylinder does not hold its load on air loss, so an external rod lock is required for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.