verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC SCJ Series · Adjustable-Stroke Cylinder

Airtac SCJ63 Standard Cylinder SCJ63X300-40S

The AirTAC SCJ63 Standard Cylinder SCJ63X300-40S is a genuine double-acting DOUBLE-ROD air cylinder whose rear rod carries the stroke ADJUSTER: the stroke end is field-adjustable within a 40 mm range without swapping the cylinder. Ø63mm bore, 300mm nominal stroke, PT1/4 ports and adjustable end cushioning.

  • BoreØ63 mm
  • Nominal stroke300 mm
  • Stroke adjust-40 mm
  • Port sizePT1/4
  • Rod threadM16×1.5
  • CushionAdjustable, 28 mm
$103.72 $111.22Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SCJ63 stroke, mounting and version on one page All SCJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SCJ63 Standard Cylinder SCJ63X300-40S

The SCJ63X300-40S is a double-acting, double-rod pneumatic cylinder with a 63 mm bore and a 300 mm nominal stroke, featuring a rear-cap adjusting screw that gives you up to 40 mm of field-adjustable stroke-end control.

With a 20 mm piston rod, PT1/4 ports, and a 28 mm air cushion, the SCJ63X300-40S provides smooth, decelerated end-of-stroke motion that you can fine-tune on the machine. The adjustable stroke is ideal for commissioning trials, format changeovers, or taking up mechanical wear without swapping the cylinder. Its body length A(SCJ) is 197 mm, and it operates reliably between -20 and +70 °C with filtered air.

Airtac SCJ63 Standard Cylinder SCJ63X300-40S Technical Specifications

ModelAirtac SCJ63 Standard Cylinder SCJ63X300-40S
SeriesSCJ adjustable-stroke tie-rod cylinder
Bore sizeØ63 mm
Nominal stroke300 mm
Stroke adjustmentUp to 40 mm (rear adjusting screw)
Acting typeDouble acting (double rod)
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 28 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SCJ (adjustable-stroke) datasheet. The adjuster on the rear rod sets the stroke end position. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

SCJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SC push of the same bore. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.

Model Code: Airtac SCJ63 Standard Cylinder SCJ63X300-40S

SCJAdjustable-stroke tie-rod cylinder series.
63Bore size in mm.
×300Nominal (maximum) stroke length in mm.
-40Adjustable-stroke range in mm (options 10/20/30/40/50/75/100).
-SOptional built-in magnet for sensor position sensing.

Related types: SC (single rod, fixed stroke), SCD (double rod), SCT (multi-position). SCJ mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SCJ63 Standard Cylinder SCJ63X300-40S Is Used

tune

Commissioning & Setup

Fine-tune the end-stop position during machine commissioning without removing the cylinder. The 40 mm adjustment range lets technicians dial in the exact stroke needed for a new fixture or tool.

conveyor_belt

Format Changeovers

Quickly adapt a packaging machine's pusher stroke for different box sizes. The rear screw adjusts the stroke end, eliminating the need for mechanical hard stops or cylinder swaps between product runs.

settings

Wear Compensation

Take up mechanical play in a clamping or pressing station over time. The adjustable stroke compensates for worn tooling or seals, maintaining consistent contact pressure without reprogramming the PLC.

Is the Airtac SCJ63 Standard Cylinder SCJ63X300-40S the Right Cylinder?

Choose the SCJ63X300-40S when you need a mid-range force actuator with the flexibility to adjust the stroke end position on the fly. For a simpler, fixed-stroke solution without the rear adjustment mechanism, the standard SC63X300 is a direct alternative.

For replacement, match this model exactly with an AirTAC SCJ63X300-40S, which includes the -S magnet option, PT port threads, and basic mounting. At a 300 mm stroke, be mindful of side-loading on the 20 mm rod; if the load is not perfectly guided, consider adding an external guide rail or switching to a guided cylinder to prevent rod bending and premature seal wear.

AirtacDistr lists every SCJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-scj63-adjustable-cylinder

Adjustable-stroke checklist

  • ✓ Need to fine-tune stroke on the line?
  • ✓ Nominal stroke + adjust range (-40)
  • ✓ Required force at your working pressure
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the rear adjusting screw, then lock it before running.
  • check Adjust end cushion screws for smooth stops.
  • check Use SCJ mounting accessory (FA / LB / TC / TCM1).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SCJ63 Standard Cylinder SCJ63X300-40S FAQ

At 0.5 MPa, the push force is 1559 N and the pull force is 1402 N. The push force is higher because the rod reduces the piston area on the return side. At the maximum operating pressure of 1.0 MPa, the theoretical push force reaches 318 kgf.

You can, but you will lose the field-adjustable stroke feature. The SC63X300 provides the same bore, stroke, and force, but its stroke is fixed. If you need to retain the ability to fine-tune the stroke end position, you must replace it with another SCJ63X300-40S adjustable-stroke cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SCJ Adjustable-Stroke Cylinders

Request a Quote for Airtac SCJ63 Standard Cylinder SCJ63X300-40S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SCJ63X300-40S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.