
The AirTAC B01-SDAJ Special Cylinder B01-SDAJ16X30-30B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 0 to 30 mm on the machine — no shims, no part change.
The AirTAC B01-SDAJ16X30-30B is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. The leading "B01-" prefix designates this as an application-dedicated, customer-specified variant of the base SDAJ16X30-30B, meaning it is mechanically identical to the standard model but grouped for specific industrial builds. An external M5x0.8 adjuster screw lets you dial the extend stroke down from the 30mm maximum to 0mm without changing parts.
The short riveted body saves valuable axial mounting depth where round-body or profile cylinders will not fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac B01-SDAJ Special Cylinder B01-SDAJ16X30-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 30 mm |
| Adjustable range | 0 – 30 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fit the compact riveted body into tight assembly fixtures where axial length is restricted, using the male M5x0.8 rod to secure small brackets.
Adjust the mechanical stop iteratively for trial positioning of test probes, relying on the fixed NBR bumper to absorb the end-of-stroke shock.
When sizing this 16mm bore actuator, evaluate your force needs bidirectionally.
Choose this unit if your fixture requires frequent on-site stroke tuning between 0 and 30 mm. It features an M5x0.8 air port and a male M5x0.8 piston rod thread (indicated by the -B option). Note that this SKU lacks the -S magnet and cannot host reed or electronic switches. A plain cylinder does not hold position on air loss; for load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
It operates at 30-500 mm/s, uses an M5x0.8 port, and the "B01-" prefix simply marks it as an application-dedicated variant of the base SDAJ16X30-30B.
Turning the external R (M5x0.8) adjuster screw shortens the extend end-position by up to 30 mm, giving a usable extend range of 0 to 30 mm.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.