
The AirTAC B06-SDA Battery Dedicated Cylinder B06-SDA20X15 is a genuine double-acting COMPACT (thin) air cylinder with a Ø20mm bore and 15mm stroke, M5×0.8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
The AirTAC B06-SDA20X15 is a double-acting single-rod compact cylinder delivering 157.1 N of push force and 131.9 N of pull force at 0.5 MPa. The leading B06- prefix marks this as a battery-manufacturing dedicated variant of the base SDA20X15, meaning it is mechanically identical to the standard series but designated for cell, module, and pack assembly lines. Its short riveted body drastically reduces axial mounting depth compared to round-body alternatives, saving valuable machine footprint.
This specific configuration features a 20 mm bore, a 15 mm stroke, and an 8 mm piston rod. It uses a fixed NBR bumper at each end to decelerate the stroke end, which is not an adjustable air cushion. Because this SKU lacks the -S option, it has no piston magnet and cannot accept magnetic switches. The female M4x0.7 rod-end thread and M5x0.8 port ensure straightforward integration into tight automation cells.
| Model | Airtac B06-SDA Battery Dedicated Cylinder B06-SDA20X15 |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø20 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod end thread | M4×0.7 female / M6×1.0 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 90 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 20 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Applies the 157.1 N extend force to align and press lithium prismatic cells into modules, utilizing the 15 mm stroke for high-speed, short-cycle stacking.
Handles precise clamping of battery tabs prior to ultrasonic welding, where the compact riveted body minimizes interference with welding heads.
Actuates a short diverter gate on a battery pack assembly conveyor, with the 8 mm rod and female M4x0.7 thread securely coupling to the routing mechanism.
When sizing this actuator, stepping down to the SDA16 yields 100.5 N of push at 0.5 MPa, while stepping up to the SDA25 provides 245.4 N. Ensure your ordering essentials match this SKU: 20 mm bore, 15 mm stroke, M5x0.8 port, female rod thread, and no sensor magnet.
A plain compact cylinder does not hold its load if air pressure is lost or the valve is centered; the piston will drift, and the fixed bumper only decelerates it near the stroke end rather than acting as a lock. If your battery-handling fixture must maintain position without live pressure, specify an external rod lock or a pilot-operated check valve.
Quick checklist
This 20 mm bore double-acting cylinder generates 157.1 N push and 131.9 N pull at 0.5 MPa, and 219.9 N push at 0.7 MPa. The theoretical maximum push force is 32 kgf at 1.0 MPa. It operates at 30-500 mm/s, accepts up to 1.0 MPa operating pressure, and has a maximum standard stroke limit of 100 mm.
The B06- prefix designates this as a battery-manufacturing dedicated variant of the SDA20X15; it shares the exact same physical specs and compact body dimensions. Because this specific SKU lacks the -S magnet option, it cannot accept AirTAC reed or electronic switches. If position sensing is required, order the -S variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.