
The AirTAC B06-SDA Battery Dedicated Cylinder B06-SDA25X15B is a genuine double-acting COMPACT (thin) air cylinder with a Ø25mm bore and 15mm stroke, M5×0.8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
The B06-SDA25X15B is an AirTAC double-acting single-rod compact cylinder. The leading "B06-" prefix marks this as the battery-manufacturing dedicated variant of the SDA25X15B, meaning it is mechanically identical to the base model but designated for cell and pack assembly lines. It delivers 245.4 N of push force and 206.2 N of pull force at 0.5 MPa.
This unit features a male M8x1.25 piston rod thread for secure load coupling. The short riveted body minimizes axial mounting depth, a crucial advantage in dense battery stacking machinery. End stops rely on a fixed NBR bumper rather than an adjustable cushion, so high-speed operations may require external shock absorbers.
| Model | Airtac B06-SDA Battery Dedicated Cylinder B06-SDA25X15B |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø25 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod end thread | M5×0.8 female / M8×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 25 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Drives the precision stacking of battery anodes and cathodes, utilizing the 15 mm stroke and 245.4 N force to press separator layers without damaging delicate coatings.
Clamps busbars and cell tabs during laser welding operations, where the male M8x1.25 rod end secures the copper electrodes firmly against the terminals.
Acts as a short-stroke pusher to route battery packs along assembly conveyors, saving axial footprint inside dense machinery via its compact riveted body.
When sizing this 25 mm bore actuator, consider stepping down to the SDA20 which provides 157.1 N of push at 0.5 MPa, or stepping up to the SDA32 which yields 402.1 N. This B06-SDA25X15B configuration specifies a 15 mm stroke, an M5x0.8 port, and a male-threaded rod end. Note that this SKU lacks the -S magnet, so position sensing is unavailable without changing to an -S variant. Because a standard compact cylinder drifts when air pressure is lost, holding a suspended load requires an external rod lock or pilot-operated check valve.
Quick checklist
At 0.5 MPa, the push force is 245.4 N and the pull force is 206.2 N. At 0.7 MPa, the push force is 343.6 N. The theoretical maximum push force is 50 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a proof pressure of 1.5 MPa.
The B06- prefix indicates this is the battery-manufacturing dedicated version of the SDA25X15B, sharing identical mechanical specifications. It does not have an adjustable air cushion; instead, it uses a fixed NBR bumper at each end to decelerate the stroke. For high-energy cycles, an external shock absorber should be added.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.