
The AirTAC B06-SDA Battery Dedicated Cylinder B06-SDA25X20S is a genuine double-acting COMPACT (thin) air cylinder with a Ø25mm bore and 20mm stroke, M5×0.8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
The AirTAC B06-SDA25X20S is a double-acting single-rod compact cylinder delivering 245.4 N of push force and 206.2 N of pull force at 0.5 MPa. The leading "B06-" prefix designates this as AirTAC's battery-manufacturing dedicated variant of the SDA25X20S, meaning it is mechanically identical to the standard model but curated for cell, module, and pack assembly lines. Its short riveted body drastically reduces axial mounting depth compared to round-body alternatives, saving critical machine footprint.
This unit includes a built-in piston magnet (the -S option) for direct mounting of AirTAC reed or electronic switches along the body grooves. End-stopping relies on a fixed NBR bumper rather than an adjustable air cushion, effectively decelerating the piston near stroke limits. Operating speed spans 30-500 mm/s, and the 10 mm rod uses a female M5x0.8 thread for load coupling.
| Model | Airtac B06-SDA Battery Dedicated Cylinder B06-SDA25X20S |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø25 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod end thread | M5×0.8 female / M8×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 25 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Provides the 245.4 N push force needed to press and align separator sheets and cathodes during prismatic lithium cell stacking operations.
Clamps busbars and battery tabs securely in place at 30-500 mm/s for automated laser welding stations without excessive footprint.
Actuates lightweight routing gates to direct battery modules through assembly conveyors, utilizing the 20 mm stroke for rapid switching.
If your battery-handling fixture requires less force, stepping down to the SDA20 yields 157.1 N at 0.5 MPa; for heavier pack manipulation, stepping up to the SDA32 provides 402.1 N. When ordering, confirm the 20 mm stroke, M5x0.8 port, female M5x0.8 rod thread, and the required -S magnet. Note that a plain compact cylinder drifts when air is lost or the valve is centered—the fixed bumper only decelerates near the end of travel, so an external rod lock or pilot-operated check valve is required to hold a vertical load securely.
Quick checklist
The B06-SDA25X20S (mechanically identical to SDA25X20S) generates 245.4 N push and 206.2 N pull at 0.5 MPa, 343.6 N push and 288.6 N pull at 0.7 MPa, with a theoretical maximum push of 50 kgf at 1.0 MPa. It features a 25 mm bore, 20 mm stroke, 10 mm rod, M5x0.8 port, and operates at 30-500 mm/s.
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder; it shares the exact physical specs of the standard SDA25X20S. It does not use adjustable air cushions—instead, a fixed NBR bumper absorbs impact at the stroke ends. For high-energy battery handling, add an external shock absorber or slow the approach speed.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.