
The AirTAC B06-SDA Battery Dedicated Cylinder B06-SDA25X5SB is a genuine double-acting COMPACT (thin) air cylinder with a Ø25mm bore and 5mm stroke, M5×0.8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
The AirTAC B06-SDA25X5SB is a double-acting, single-rod compact cylinder engineered for battery-manufacturing lines. The leading "B06-" prefix designates this as a battery-industry dedicated variant of the base SDA25X5SB, meaning it is mechanically identical to the standard model but earmarked for cell, module, and pack assembly applications. Delivering 245.4 N of push force at 0.5 MPa, it fits perfectly into tight stacking or tabbing stations.
This unit features a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body grooves, and a male-thread piston rod (-B, M8x1.25) for secure load coupling. The short riveted body drastically reduces axial mounting depth compared to round-body cylinders. End-stops rely on a fixed NBR bumper that decelerates the stroke, which is not an adjustable air cushion. For high-speed cycling, an external shock absorber is recommended.
| Model | Airtac B06-SDA Battery Dedicated Cylinder B06-SDA25X5SB |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø25 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod end thread | M5×0.8 female / M8×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 25 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Ideal for precision stacking of lithium-ion pouch cells, utilizing the 5 mm short stroke and 245.4 N push force to press layers without damaging delicate separators.
Clamps busbars and battery module tabs securely in place prior to laser welding, using the male M8x1.25 rod end for rigid tooling attachment in compact fixtures.
Acts as a compact diverter on a battery pack assembly conveyor, fitting into tight machine footprints where axial length is restricted while providing positive positioning feedback via the magnetic switch.
When sizing this 25 mm bore actuator, step down to the SDA20 (157.1 N push at 0.5 MPa) for lighter sensing or gripping tasks, or step up to the SDA32 (402.1 N push at 0.5 MPa) if your module-handling rig needs greater thrust. Confirm your ordering essentials: 25 mm bore, 5 mm stroke, M5x0.8 port, built-in magnet, and male M8x1.25 rod thread. Note that a plain compact cylinder drifts when air is lost or the valve is centered; the fixed bumper only decelerates near stroke end and does not function as a lock. To hold a vertical load securely without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
This 25 mm bore double-acting cylinder provides a push force of 245.4 N and a pull force of 206.2 N at 0.5 MPa. At 0.7 MPa, the push force is 343.6 N and pull is 288.6 N. The theoretical maximum push force is 50 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, with a proof pressure of 1.5 MPa, and supports a speed range of 30-500 mm/s.
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated variant of the SDA25X5SB; it shares the exact same physical specs as the base model. Regarding the rod, the -B option specifies a male-threaded piston rod (M8x1.25) rather than the default female thread (M5x0.8), allowing for direct mechanical fastening of tooling. It uses a fixed NBR bumper at stroke ends, not an adjustable cushion.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.