
The AirTAC B06-SDA Battery Dedicated Cylinder B06-SDA32X10B is a genuine double-acting COMPACT (thin) air cylinder with a Ø32mm bore and 10mm stroke, PT1/8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
The AirTAC B06-SDA32X10B is a double-acting, single-rod compact cylinder engineered for battery manufacturing lines. The B06- prefix designates this as a battery-industry dedicated variant of the SDA32X10B, retaining exact mechanical parity with the base model while suiting cell, module and pack assembly tasks. It delivers a push force of 402.1 N and pull force of 345.6 N at 0.5 MPa.
Featuring a 10 mm stroke and a 32 mm bore, this unit uses a short riveted body to minimize axial mounting depth where standard profile cylinders cannot fit. The piston rod measures 12 mm and, per the B suffix, utilizes a male M10x1.25 thread for direct load coupling. End-stopping relies on a fixed NBR bumper rather than an adjustable air cushion, effectively decelerating the piston near stroke limits without acting as a lock.
| Model | Airtac B06-SDA Battery Dedicated Cylinder B06-SDA32X10B |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M6×1.0 female / M10×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Applies the 402.1 N push force to align and press lithium-ion prismatic cells precisely during automated stacking processes.
Utilizes the 10 mm short stroke and male M10x1.25 rod to clamp busbars and battery tabs tightly prior to ultrasonic welding.
Employs the compact riveted body to fit within tight conveyor frames, deflecting battery packs along assembly routing lanes.
When sizing this actuator, stepping down to the SDA25 yields 245.4 N of push force at 0.5 MPa, whereas stepping up to the SDA40 provides 628.3 N. Note that a plain compact cylinder drifts when air pressure is lost or the valve is centered; the fixed bumper only decelerates the stroke end and does not function as a brake. To hold a load securely, integrate an external rod lock or a pilot-operated check valve. To order, confirm the 32 mm bore, 10 mm stroke, PT1/8 port, male M10x1.25 rod thread, and the absence of a piston magnet.
Quick checklist
This double-acting 32 mm bore cylinder provides a push force of 402.1 N and a pull force of 345.6 N at 0.5 MPa. At 0.7 MPa, the push force is 563 N. The theoretical maximum push force is 82 kgf at 1.0 MPa. It operates at speeds between 30-500 mm/s.
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the SDA32X10B, mechanically identical to the standard model. This specific SKU lacks the S option, meaning it has no piston magnet and cannot accept AirTAC reed or electronic switches. The -B suffix denotes the male M10x1.25 threaded piston rod end.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.