
The AirTAC B06-SDA Battery Dedicated Cylinder B06-SDA32X10SB is a genuine double-acting COMPACT (thin) air cylinder with a Ø32mm bore and 10mm stroke, PT1/8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
The AirTAC B06-SDA32X10SB is a double-acting, single-rod compact cylinder engineered for battery manufacturing lines. The leading "B06-" prefix designates this as an application-specific variant for cell, module, and pack assembly, mechanically identical to the standard SDA32X10SB. It delivers a push force of 402.1 N and a pull force of 345.6 N at 0.5 MPa, utilizing a 32mm bore and a 10mm stroke.
This unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body grooves, and features a male M10x1.25 threaded rod end (-B) for secure load coupling. The riveted body design drastically reduces axial mounting depth compared to round-body cylinders. End-of-stroke deceleration is handled by a fixed NBR bumper, which is not an adjustable air cushion, so external shock absorbers should be added for high-energy impacts.
| Model | Airtac B06-SDA Battery Dedicated Cylinder B06-SDA32X10SB |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M6×1.0 female / M10×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Applies the 402.1 N extend force to precisely press and align lithium-ion prismatic cells during automated z-stacking processes.
Utilizes the 10mm short stroke and male M10x1.25 rod to clamp busbars and battery tabs tightly before laser welding operations.
Actuates routing gates on battery pack assembly lines, where the compact riveted body saves valuable axial footprint in dense machinery.
When sizing this actuator, consider stepping down to the SDA25, which provides 245.4 N of push force at 0.5 MPa, or stepping up to the SDA40, which yields 628.3 N at 0.5 MPa. To order, confirm the 32mm bore, 10mm stroke, PT1/8 port, built-in magnet, and the male M10x1.25 piston rod thread. Note that a plain compact cylinder drifts when air pressure is lost or the valve is centered; the fixed bumper only decelerates the stroke end and does not function as a locking brake, so an external rod lock or pilot-operated check valve is required to hold a load safely.
Quick checklist
This 32mm bore double-acting cylinder provides a push force of 402.1 N and a pull force of 345.6 N at 0.5 MPa. At 0.7 MPa, the push force is 563 N. The theoretical maximum push force is 82 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a proof pressure of 1.5 MPa.
The B06- prefix simply indicates this unit is curated for battery-manufacturing applications; it is mechanically identical to the standard SDA32X10SB. It does not have an adjustable air cushion. Instead, it uses a fixed NBR bumper at each end to decelerate the piston. For high-speed cycling, you should add an external shock absorber.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.