The AirTAC Airtac BFC F.R.L Pneumatic Air Filter BFC3000MLNG is a genuine A/B-line two-unit F.R.L. set with PT3/8" ports. It is the compact air-preparation line, regulating 0.15 - 0.9 MPa (20 - 130 psi) with a push-to-lock knob and oil-mist lubrication with a transparent sight dome. Flow is confirmed from the datasheet on request.
The AirTAC BFC3000MLNG is a two-unit combination set from the compact B-line: a filter-regulator plus a lubricator in one ordered package, so compressed air is filtered, regulated and lubricated in a single installation. This 3000-size unit has a 3/8 in G(BSPP) port, a 40 um standard filter element and a manual drain, so condensate is emptied by hand as part of routine maintenance. The L in the code marks the low-pressure regulator type, limited to a maximum of 0.4 MPa, and the N means the set is supplied without a pressure gauge. The lubricator section has a transparent sight dome so the oil drip rate can be observed and adjusted directly. This is a genuine AirTAC part from the compact A/B line of air-treatment units. The BFC two-unit set is available in 1/8, 1/4, 3/8 and 1/2 in port sizes, with automatic, manual or differential-pressure drains, a 5 um (W) filter option, G or NPT thread options, and gauge or gaugeless builds. Flow is not published as a single rated figure, so ask us to confirm the flow and datasheet figures for this exact model before you order.
| Model | Airtac BFC F.R.L Pneumatic Air Filter BFC3000MLNG |
|---|---|
| Type | Two-Unit (Filter-Regulator + Lubricator) |
| Line | B-line (compact A/B air preparation) |
| Port size | PT3/8" (G (BSPP) thread) |
| Filter grade | 40 um standard, 5 um optional (W) |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) (low-pressure type to 0.4 MPa) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Lubrication | Oil-mist, transparent sight dome |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
Choose the B-line (BFC) when your line runs through larger 3/8 in ports and higher air demand than the A-line covers; the A-line equivalents serve the smaller 1/8 and 1/4 sizes. This unit is built with a manual drain - pick the A suffix instead if you want an automatic drain that removes condensate without daily attention. The 40 um element is the standard grade; specify W if the downstream valves need 5 um filtration. The L type caps regulation at 0.4 MPa, so confirm your circuit actually works at low pressure before selecting it over the standard type. This code leaves the gauge out; order a version without the N if you need a local pressure reading, and note the G suffix gives G(BSPP) threads while PT and NPT are available to order. Flow is not a single published rating, so ask us to confirm sizing against your demand before ordering.
On a weaving or spinning line that runs pneumatic jets and rollers at reduced pressure, this two-unit set cleans the supply, holds the low setting within the 0.4 MPa limit, and meters a light oil mist to the machine's air cylinders.
Feeding the valve island of a carton-forming or bagging machine, the set removes water and 40 um-scale particles, regulates the supply, and lubricates the actuators, with the sight dome letting an operator check the drip rate at a glance.
On a machining fixture that clamps delicate workpieces with air at low pressure, the low-pressure regulator type keeps the setting safely capped at 0.4 MPa, the filter protects the clamping cylinder, and the lubricator keeps its seals and bore conditioned.
AirTAC does not publish flow for this compact two-unit set as a single rated figure, so we do not quote one. The honest way to size it is against your actual demand: send us your required flow and operating pressure and we will confirm the datasheet figures for the BFC3000MLNG before you order.
L marks the low-pressure regulator type, whose setting is limited to a maximum of 0.4 MPa instead of the standard range. N means this unit is supplied without a pressure gauge. The standard BFC3000 builds include a gauge, and gauge scale options are available to order if you need a local reading.