
The AirTAC GAC F.R.L. Unit GAC200N06AST is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for single actuators, this AirTAC combination pre-assembles a filter, regulator and lubricator on one L-shape bracket with quick mounting clamps. The 1/8in port pairs with a 40 um element and a standard pressure range of 0.15-0.9 MPa (20-130 psi). Because the build order places the lubricator downstream of the regulator, oil mist is added last and never fouls the regulating seat.
The nylon bowl equips this unit with an automatic drain that clears condensate without an operator, which is decisive for unattended lines. A circular gauge is fitted and reads MPa/psi for the default NPT thread. Weighing 750 g, the assembly holds 25 cc of condensate and 36 cc of oil, while the catalogue flow curve is plotted to 1750 L/min at 0.7 MPa inlet. Order code GAC200N06AST has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC200N06AST |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds clean, regulated and lubricated air to single-actuator holding jigs on electronics assembly benches.
Conditions air for compact benchtop presses where a 1/8in port and a 750 g footprint fit tight spaces.
Supplies stable pressure to small lab-scale pick-and-place heads using standard 0.15-0.9 MPa settings.
This 1/8in body suits light-duty jigs where a larger unit would be overkill, and its 750 g mass means it should mount to a panel or frame rather than hang from tubing. The automatic drain pairs well with the 25 cc condensate bowl for wet lines, and the fitted gauge lets operators verify the set pressure directly. If the downstream line must stay oil-free, omit the lubricator and choose a filter-regulator instead. Spares follow the body-port suffix exactly: GAF200-06, GAR200-06 and GAL200-06.
Because the maximum supply is 1.0 MPa and the Standard type regulates to 0.9 MPa, there is only about 0.1 MPa of headroom above the top setting.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
It operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It holds 25 cc of condensate and 36 cc of oil, uses ISO VG 32 lubricant, and weighs 750 g.
The A in the code specifies an automatic drain that expels condensate without manual intervention, which suits unattended or wet lines. The N before the port indicates the nylon bowl material, and the unit includes a fitted circular gauge reading MPa/psi.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.