verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAC200 · F.R.L. Combination (Filter + Regulator + Lubricator)

Airtac GAC F.R.L. Unit GAC200N06ASWTK

The AirTAC GAC F.R.L. Unit GAC200N06ASWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeF.R.L. combination
  • Port size1/8"
  • Pressure range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade5 µm
  • Bowl materialNylon
  • Drainautomatic
  • Pressure gaugeCircular, psi / bar
  • Weight750 g
$94.00 $101.50Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAC200-06 bowl, type and element option on one page All GAC200-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAC F.R.L. Unit GAC200N06ASWTK

Delivering cleaned, regulated and lubricated air for single actuators, this AirTAC GAC200N06ASWTK F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/8in port feeds a standard pressure range of 0.15-0.9 MPa (20-130 psi). A 5 um element captures fine particles for precision pneumatics, and the fitted circular gauge reads in MPa/psi for the default NPT thread.

The nylon bowl equips this compact 750 g unit for specific environmental needs, while the automatic drain clears condensate from the 25 cc sump without operator input. Because the lubricator adds oil mist downstream of the regulator seat, the internal valve stays clean. This model includes a reverse-flow (reflux) valve, shown as a separate pneumatic symbol in the catalogue, and replacement parts are available as GAF200-06, GAR200-06 and GAL200-06.

Airtac GAC F.R.L. Unit GAC200N06ASWTK Technical Specifications

ModelAirtac GAC F.R.L. Unit GAC200N06ASWTK
SeriesGAC200 F.R.L. combination
Port size1/8" (NPT thread)
Filtering grade5 µm
Pressure range0.15 - 0.9 MPa (20 - 130 psi)
TypeStandard
Bowl materialNylon
Drain typeAutomatic drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl25 cc
Capacity of oil bowl36 cc
Recommended lubricantISO VG 32 or equivalent
Weight750 g

Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.

Model Code: Airtac GAC F.R.L. Unit GAC200N06ASWTK

GAC200GA200 series F.R.L. unit — sets ports, bowl capacity and weight.
NBowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N).
06Port size 1/8". This body offers 06 = 1/8", 08 = 1/4".
ADrain: Automatic drain.
SStandard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L).
(blank)Circular pressure gauge fitted.
WFiltering grade 5 µm.
TNPT thread; gauge scale psi / bar.
KReverse-flow (reflux) valve attached.

Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.

Size Class & Flow Envelope

  • GAC2001/8"-1/4" · 1750 L/min
  • GAC3001/4"-1/2" · 3000 L/min
  • GAC4003/8"-1/2" · 6000 L/min
  • GAC5003/4" · 7000 L/min
  • GAC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAC200 · 1/8" · curve to 1750 L/min
One size upGAC300 (curve to 3000 L/min)
Build orderFilter → bracket → regulator → lubricator

Where the Airtac GAC F.R.L. Unit GAC200N06ASWTK Is Used

precision_manufacturing

Micro-Pneumatic Clamps

Feeds clean, oil-misted air to small precision clamping jigs on electronics assembly lines, protecting delicate valve internals with its 5 um element.

handyman

Benchtop Air Tools

Conditions air for single-station benchtop tools, with the automatic drain handling condensate from intermittent use in a 25 cc bowl.

science

Lab Actuator Stations

Regulates pressure for individual laboratory actuator setups, providing stable 0.15-0.9 MPa output for repeatable test cycling.

Is the Airtac GAC F.R.L. Unit GAC200N06ASWTK the Right Air-Prep Unit?

Choose this 1/8in port body for light-duty tasks, as its 750 g mass suits a panel mount rather than tubing support. The 5 um element offers superior protection for sensitive valves compared to the standard 40 um grade, though it requires more frequent service. The automatic drain is decisive for unattended or wet lines, and the fitted gauge lets operators verify the 0.15-0.9 MPa (20-130 psi) setting directly. If the downstream line must stay oil-free, select a filter-regulator instead of this unit. Note that the maximum supply is 1.0 MPa (145 psi) and the Standard type regulates to 0.9 MPa, leaving only about 0.1 MPa of headroom above the top setting.

Quick checklist

  • ✓ Body size for your peak flow (1/8" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 25 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 750 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.

Airtac GAC F.R.L. Unit GAC200N06ASWTK FAQ

This standard type unit operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, the drain bowl holds 25 cc, the oil bowl holds 36 cc, the recommended lubricant is ISO VG 32, and it weighs 750 g.

The K indicates that a reverse-flow (reflux) valve is fitted. The catalogue displays this as a distinct pneumatic symbol on its own page, and the unit is configured with this specific ordering difference.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAC F.R.L. Unit GAC200N06ASWTK

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAC200N06ASWTK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.