
The AirTAC GAC F.R.L. Unit GAC200N06SNTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for compact pneumatics, this unit combines a filter, regulator and lubricator on a single L-shape bracket. The 1/8in port pairs with a 40 um element and a standard pressure range of 0.15-0.9 MPa (20-130 psi). Because the lubricator sits last in the sequence, oil mist is added downstream of the regulator seat, preventing fouling during pressure control.
Built with a nylon bowl, this variant omits the pressure gauge entirely; a 1/8in gauge connection remains available if you need to add instrumentation later. The reverse-flow (reflux) valve is fitted, shown in the catalogue as a separate pneumatic symbol. With a 750 g mass, the assembly needs proper panel mounting rather than tubing support, and the 36 cc oil bowl dictates frequent top-ups for continuous duty. Order code GAC200N06SNTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC200N06SNTK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds single-acting cylinders and clamping jigs where space is tight and a 1/8in port is sufficient.
Conditions air for benchtop testing rigs, adding a controlled oil mist for delicate moving parts.
Prepares air for individual air tools on a workshop drop, filtering particulates down to 40 um.
Choose this 1/8in port body for single actuators or small jigs, stepping up to the GAC300 if you need a larger 60 cc drain bowl. The semi-auto and manual drain pair handles condensate without power, while the 40 um element suits general plant air. If the downstream line must remain oil-free, select a filter-regulator instead of this combination. Replacement parts share the 200-06 suffix: GAF200-06, GAR200-06 and GAL200-06. The plotted flow curve reaches 1750 L/min at 0.7 MPa inlet, which is roughly 29% of the GAC400's 6000 L/min envelope. Max supply is 1.0 MPa and the Standard type regulates to 0.9 MPa, leaving only about 0.1 MPa of headroom above the top setting.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This model operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 25 cc drain bowl, a 36 cc oil bowl, weighs 750 g, and uses ISO VG 32 lubricant.
The N after the port indicates no gauge is supplied. You can add one later using the 1/8in gauge connection. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.