verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAC200 · F.R.L. Combination (Filter + Regulator + Lubricator)

Airtac GAC F.R.L. Unit GAC200N06SNWTK

The AirTAC GAC F.R.L. Unit GAC200N06SNWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeF.R.L. combination
  • Port size1/8"
  • Pressure range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade5 µm
  • Bowl materialNylon
  • Drainsemi-auto + manual
  • Pressure gaugeNot fitted
  • Weight750 g
$79.81 $87.31Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAC200-06 bowl, type and element option on one page All GAC200-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAC F.R.L. Unit GAC200N06SNWTK

Delivering cleaned, regulated and lubricated air for pneumatic setups, this AirTAC F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. This specific GAC200N06SNWTK variant features a 1/8in port, a 5 um element for trapping fine particles, and a standard pressure range of 0.15-0.9 MPa (20-130 psi). The build routes air through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls.

Because the code carries an N after the port, no pressure gauge is supplied from the factory, though a 1/8in gauge connection is ready if you need to add one later. The nylon bowl provides a lightweight housing for the 25 cc condensate sump and 36 cc oil reservoir, and this model includes a reverse-flow (reflux) valve, shown as a separate pneumatic symbol in the catalogue. If your downstream process requires air without oil mist, you must omit the lubricator entirely and select a dedicated filter-regulator instead. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac GAC F.R.L. Unit GAC200N06SNWTK Technical Specifications

ModelAirtac GAC F.R.L. Unit GAC200N06SNWTK
SeriesGAC200 F.R.L. combination
Port size1/8" (NPT thread)
Filtering grade5 µm
Pressure range0.15 - 0.9 MPa (20 - 130 psi)
TypeStandard
Bowl materialNylon
Drain typeSemi-auto drain + manual drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl25 cc
Capacity of oil bowl36 cc
Recommended lubricantISO VG 32 or equivalent
Weight750 g

Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.

Model Code: Airtac GAC F.R.L. Unit GAC200N06SNWTK

GAC200GA200 series F.R.L. unit — sets ports, bowl capacity and weight.
NBowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N).
06Port size 1/8". This body offers 06 = 1/8", 08 = 1/4".
(blank)Drain: Semi-auto drain + manual drain.
SStandard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L).
NNo pressure gauge; 1/8" gauge connection.
WFiltering grade 5 µm.
TNPT thread; gauge scale psi / bar.
KReverse-flow (reflux) valve attached.

Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.

Size Class & Flow Envelope

  • GAC2001/8"-1/4" · 1750 L/min
  • GAC3001/4"-1/2" · 3000 L/min
  • GAC4003/8"-1/2" · 6000 L/min
  • GAC5003/4" · 7000 L/min
  • GAC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAC200 · 1/8" · curve to 1750 L/min
One size upGAC300 (curve to 3000 L/min)
Build orderFilter → bracket → regulator → lubricator

Where the Airtac GAC F.R.L. Unit GAC200N06SNWTK Is Used

precision_manufacturing

Micro-Pneumatic Jigs

Feeds clean, oil-misted air at a stable pressure to small handling jigs fitted with delicate 1/8in grippers and miniature cylinders.

science

Lab Automation

Prepares supply air for benchtop fluid dispensing robots, relying on the 5 um element to protect sensitive proportional valves from fine particulates.

handyman

Benchtop Tool Lines

Conditions air for miniature air motors and screwdrivers on assembly benches, adding necessary oil mist to prolong tool bearing life.

Is the Airtac GAC F.R.L. Unit GAC200N06SNWTK the Right Air-Prep Unit?

Choose this 750 g unit for single actuators or small jigs where space is tight, stepping up to the GAC300 if you need a larger 60 cc drain bowl or a wider flow envelope (the GAC200 curve is plotted to 1750 L/min at 0.7 MPa inlet, roughly 58% of the GAC300's 3000 L/min). The 5 um W element catches far finer grit than the standard 40 um mesh, suiting precision valves but requiring more frequent element swaps. A semi-auto and manual drain are both fitted, and the three individual units are separately orderable as GAF200-06, GAR200-06 and GAL200-06. Remember that the maximum supply is 1.0 MPa and the standard type regulates to 0.9 MPa, leaving only about 0.1 MPa of headroom, so plan a supply near 1.0 MPa if you truly need 0.9 MPa out.

Quick checklist

  • ✓ Body size for your peak flow (1/8" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 25 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 750 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.

Airtac GAC F.R.L. Unit GAC200N06SNWTK FAQ

This standard type unit operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It functions from -5 to 70 C, weighs 750 g, has a 25 cc drain bowl and a 36 cc oil bowl, and recommends ISO VG 32 lubricant.

The N positioned after the 06 port code means no pressure gauge is supplied, though a 1/8in connection exists for adding one. The K indicates a reverse-flow (reflux) valve is fitted, which the catalogue details on its own page.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAC F.R.L. Unit GAC200N06SNWTK

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAC200N06SNWTK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.