
The AirTAC GAC F.R.L. Unit GAC200N06ST is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GAC200N06ST is a compact F.R.L. combination that conditions air for a single actuator or small jig: a filter traps water and particles, the regulator holds a stable outlet pressure, and a lubricator adds a controlled oil mist. It arrives pre-assembled on an L-shape bracket with quick clamps, so there is no inter-unit tubing to leak and commissioning is one bracket, not three separate mounts.
This unit uses a 1/8in port and a nylon bowl, with a 25 cc condensate bowl and a 36 cc oil bowl - the smallest in the GAC range, sized for a 750 g assembly. It regulates from 0.15 to 0.9 MPa (20-130 psi) with a 40 um element, and the circular gauge reads MPa/psi on the default NPT thread. The nylon bowl is a build choice; the common specification of 1.0 MPa max and -5 to 70 C applies, so confirm compatibility for aggressive surroundings.
| Model | Airtac GAC F.R.L. Unit GAC200N06ST |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feed one pneumatic cylinder on a benchtop assembly jig with cleaned, regulated and lubricated air at up to 0.9 MPa.
Condition air for a compact riveting or crimping tool in a maintenance bay where space is tight and a 1/8in port matches the tooling.
Supply a controlled air pressure to a laboratory test fixture that cycles a small valve or gripper, with the gauge for setpoint verification.
Choose the GAC200N06ST when a 1/8in port and a 750 g unit suit a light-duty station, and compare it against the GAC300's 60 cc bowl if condensate volume is a concern. The nylon bowl resists different environments than the standard PC, and the semi-auto drain dumps on each pressure drop with a manual backup for on-demand use. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The filter, regulator and lubricator are separately orderable as GAF200-06, GAR200-06 and GAL200-06. The regulation headroom above the 0.9 MPa top setting is only about 0.1 MPa, so plan a supply near 1.0 MPa if you need the full output.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
The GAC200N06ST operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It is rated for -5 to 70 C, uses ISO VG 32 lubricant, and weighs 750 g. The condensate bowl holds 25 cc and the oil bowl holds 36 cc.
The N before the port code indicates a nylon bowl instead of the standard polycarbonate. It is a material choice for the bowl; the pressure and temperature ratings remain the same as the common specification, so confirm compatibility with any aggressive chemicals or solvents in your environment.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.