
The AirTAC GAC F.R.L. Unit GAC30015ALNWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air downstream, the GAC30015ALNWTK pre-assembles a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. This 1/2in port combination processes air through a 5 um element before the lubricator introduces oil mist, ensuring the regulator seat stays dry. The automatic drain empties the 60 cc condensate bowl without an operator.
Configured for low-pressure duties, this unit regulates between 0.15-0.4 MPa (20-58 psi) and carries no gauge, leaving a 1/8in connection for adding one. The reverse-flow (reflux) valve is fitted, which the catalogue shows as a separate pneumatic symbol with details on its own page. At 1300 g, the assembly needs a solid panel mount rather than tubing support. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC30015ALNWTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds delicate actuator circuits on CNC machining centers where a 0.4 MPa ceiling prevents workpiece deformation.
Conditions air for thin-film sealing jaws and low-pressure transfer arms, adding necessary oil mist for sliding guides.
Supplies 5 um filtered air to sensitive analytical instruments and low-pressure test rigs requiring stable, mist-lubricated control valves.
Choose this GAC300 variant for 1/2in lines requiring fine 5 um filtration and a low 0.15-0.4 MPa (20-58 psi) ceiling. The automatic drain suits unattended or wet environments, while the PC bowl matches the standard 1.0 MPa (145 psi) maximum. If the machine requires oil-free output, omit the lubricator and select a dedicated filter-regulator instead. Spares follow the body-port suffix exactly: GAF300-15, GAR300-15 and GAL300-15.
Stepping down, the GAC200 plots a 1750 L/min flow envelope at 0.7 MPa inlet, whereas this GAC300 reaches 3000 L/min. Because the lower-pressure type tops out at 0.4 MPa, it provides only 44% of the standard 0.9 MPa ceiling.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type regulates from 0.15-0.4 MPa (20-58 psi). It shares a 1.0 MPa (145 psi) max pressure, a 1.5 MPa (215 psi) proof pressure, and a -5 to 70 C temperature range with all GAC units. The drain bowl holds 60 cc, the oil bowl holds 98 cc, the unit weighs 1300 g, and the recommended lubricant is ISO VG 32.
The N in the code means no gauge is supplied, but a 1/8in gauge connection allows you to add one to read the set pressure. The K denotes a reverse-flow (reflux) valve fitted to the unit, which the catalogue illustrates as a distinct pneumatic symbol on its own page.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.