
The AirTAC GAC F.R.L. Unit GAC30015ALT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/2in ported body carries a 40 um element and operates within the lower 0.15-0.4 MPa (20-58 psi) pressure band. An automatic drain actively clears condensate from the 60 cc bowl without operator intervention, while a pre-fitted circular gauge lets technicians verify the set pressure directly.
Air travels through the filter first, then the regulator, before oil mist is introduced by the lubricator. This sequence prevents oil from fouling the regulator seat. If a process requires clean air without lubrication downstream, a dedicated filter-regulator should be selected instead of this unit. Order code GAC30015ALT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC30015ALT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds delicate pneumatic grippers and low-pressure actuators on electronics assembly lines where forces must stay beneath 0.4 MPa.
Conditions air for sensitive bagging and sealing mechanisms that rely on soft, regulated pressure to avoid crushing product.
Prepares supply for benchtop fluid and gas handling systems requiring stable, low-pressure air with added lubrication for valves.
Choose this lower-pressure variant for equipment restricted to a 0.15-0.4 MPa operating band; if the machine might ever require more than 0.4 MPa, the standard type is the correct choice. The PC bowl suits general industrial environments, while the NPT thread sets the fitted gauge scale to MPa/psi. The 60 cc condensate bowl and 98 cc oil sump dictate the maintenance interval, and replacement spares follow the GAF300-15, GAR300-15 and GAL300-15 part numbers. Relative to the GAC200 body, the plotted flow envelope for this unit reaches 3000 L/min at 0.7 MPa inlet, compared to 1750 L/min for the smaller frame. Selecting the L type caps the ceiling at 44% of the 0.9 MPa standard maximum.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This model regulates from 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 1300 g, uses a 40 um element, and features a 60 cc drain bowl with a 98 cc oil bowl. The recommended lubricant is ISO VG 32.
The integrated automatic drain empties the 60 cc condensate bowl whenever pressure drops, removing the need for manual emptying. This makes the unit particularly suitable for wet lines or installations that are difficult to access regularly.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.