
The AirTAC GAC F.R.L. Unit GAC30015ALWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for pneumatic systems, this GAC30015ALWTK is a complete three-unit combination featuring a filter, regulator and lubricator pre-plumbed on a single L-shape bracket. The 1/2in port serves a 1300 g assembly that pairs a 60 cc condensate bowl with a 98 cc oil reservoir. Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of the internal pressure-control mechanism.
Configured for low-pressure duties, the regulator operates within 0.15-0.4 MPa (20-58 psi). The unit uses a 5 um element to trap fine particles for precision valves, while the automatic drain clears condensate without operator intervention. A circular gauge reading MPa/psi is fitted for the default NPT thread, and the assembly includes a reverse-flow (reflux) valve, which the catalogue shows as a separate pneumatic symbol with details on its own page.
| Model | Airtac GAC F.R.L. Unit GAC30015ALWTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds instrument air to sensitive solenoid valve banks using the 5 um element to prevent sticking in tight-tolerance spools.
Supplies a regulated 0.15-0.4 MPa output to packaging equipment where high pressure would crush delicate film or cartons.
Conditions air for benchtop fluid handling systems, relying on the automatic drain to handle condensate during continuous daily cycles.
Choose this model for 1/2in lines requiring strict low-pressure control, noting that if the machine may ever need more than 0.4 MPa, this lower-pressure type is the wrong part. The 5 um element provides finer filtration than the 40 um standard, ideal for instrument air, at the cost of more frequent element service. The automatic drain suits unattended or wet lines, and the PC bowl carries the same 1.0 MPa max pressure rating as metal or nylon alternatives. If the downstream line must stay oil-free, omit the lubricator and choose a filter-regulator instead. For maintenance, the three units are separately orderable as GAF300-15, GAR300-15 and GAL300-15, so a clogged element or damaged bowl does not require replacing the whole assembly. The catalogue flow curve for the GAC300 is plotted to 3000 L/min at 0.7 MPa inlet, which is double the 1750 L/min envelope of the GAC200, giving clear room to size up or down. Keep in mind that 0.4 MPa is about 44% of the Standard type's 0.9 MPa ceiling, quantifying exactly what the buyer gives up when choosing this L type.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type regulates from 0.15-0.4 MPa (20-58 psi), with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 1300 g, and features a 60 cc drain bowl alongside a 98 cc oil bowl. The recommended lubricant is ISO VG 32 or equivalent.
The K signifies that a reverse-flow (reflux) valve is fitted to this specific assembly. The official catalogue illustrates this component as a distinct pneumatic symbol, directing users to its dedicated page for complete functional details.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.