
The AirTAC GAC F.R.L. Unit GAC30015ASNT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air, this AirTAC GAC30015ASNT combines a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. The 1/2in ported body operates at 0.15-0.9 MPa (20-130 psi) and uses a 40 um element. Because the lubricator sits last in the sequence, oil mist is added downstream of the regulator seat, preventing fouling during pressure control.
This specific configuration uses a PC bowl paired with an automatic drain, clearing condensate without an operator on wet lines. No gauge is supplied, but a 1/8in gauge connection allows adding one to read the set pressure. The 60 cc condensate bowl and 98 cc oil sump dictate the maintenance interval, while the 1300 g mass requires a firm panel mount rather than tubing support. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC30015ASNT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds multi-station looms and spinning frames where the 1/2in port handles high volume and the auto drain manages condensate in humid environments.
Provides steady 0.15-0.9 MPa pressure and downstream oil mist to the moving sealing jaws and folding mechanisms on continuous packaging equipment.
Conditions air for heavy-duty pusher cylinders, ensuring the 40 um element captures rust and pipe scale before it reaches critical valve seals.
Choose this 1/2in PC bowl model for unattended lines where the automatic drain prevents liquid carryover. If the application requires finer protection for precision valves, step up to the 5 um element variant. Remember that oil mist is added downstream; select a separate filter-regulator if the downstream line must remain strictly oil-free. Spares keep the same body-port suffix: order GAF300-15, GAR300-15 and GAL300-15 individually rather than replacing the whole assembly. Stepping up to the GAC400 roughly doubles the plotted flow envelope to 6000 L/min at 0.7 MPa inlet compared to this body's 3000 L/min curve, but the GAC300 holds a 1.5x proof margin of 1.5 MPa against the 1.0 MPa maximum.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit regulates from 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, weighs 1300 g, and uses ISO VG 32 lubricant. The drain bowl holds 60 cc and the oil bowl holds 98 cc.
No, the N in the code means no gauge is supplied. The body features a 1/8in gauge connection, so you can install a separate NPT-threaded gauge reading in MPa/psi to verify your exact set pressure.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.