
The AirTAC GAC F.R.L. Unit GAC30015ASNTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for mid-size pneumatics, this GAC30015ASNTK combination integrates a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. The 1/2in port serves the 1300 g body, while the internal flow path passes through the filter first, then the regulator, and finally the lubricator so oil mist is added downstream of the regulator seat.
This specific unit carries a 40 um element, a PC bowl, and an automatic drain that clears the 60 cc condensate bowl without an operator. Because the code contains an N after the port, no gauge is supplied; the 1/8in gauge connection allows adding one if reading the set pressure becomes necessary. The standard type regulates from 0.15-0.9 MPa (20-130 psi) and the assembly includes a reverse-flow valve, which the catalogue shows as a separate pneumatic symbol with details on its own page.
Selection should weigh the 1/2in port against the neighbouring GAC400, which steps up to a 100 cc drain bowl and a flow envelope plotted to 6000 L/min at 0.7 MPa inlet compared to this body's 3000 L/min curve. This model uses the automatic drain for unattended lines, whereas a blank drain code ships both semi-auto and manual options. If the downstream line must stay oil-free, omit the lubricator and choose a filter-regulator instead. The three units are separately orderable as GAF300-15, GAR300-15 and GAL300-15, meaning a clogged element does not require replacing the whole assembly. Stepping from this 3000 L/min envelope to the GAC200's 1750 L/min curve yields a 1.7x flow difference, providing a clear sizing step down for lighter duties. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC30015ASNTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds a 1/2in pneumatic header on a form-fill-seal line, supplying steady 0.15-0.9 MPa pressure to bagging cylinders while the automatic drain handles condensate during continuous shifts.
Conditions air for a multi-valve sorting divertor, using the 40 um element to protect spools and the lubricator to oil the moving divertor actuators.
Prepares supply for a localized assembly cell, adding oil mist downstream of the regulator to maintain speed on pick-and-place grippers without fouling the regulator seat.
Delivering cleaned, regulated and lubricated air for mid-size pneumatics, this GAC30015ASNTK combination integrates a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. The 1/2in port serves the 1300 g body, while the internal flow path passes through the filter first, then the regulator, and finally the lubricator so oil mist is added downstream of the regulator seat.
This specific unit carries a 40 um element, a PC bowl, and an automatic drain that clears the 60 cc condensate bowl without an operator. Because the code contains an N after the port, no gauge is supplied; the 1/8in gauge connection allows adding one if reading the set pressure becomes necessary. The standard type regulates from 0.15-0.9 MPa (20-130 psi) and the assembly includes a reverse-flow valve, which the catalogue shows as a separate pneumatic symbol with details on its own page.
Selection should weigh the 1/2in port against the neighbouring GAC400, which steps up to a 100 cc drain bowl and a flow envelope plotted to 6000 L/min at 0.7 MPa inlet compared to this body's 3000 L/min curve. This model uses the automatic drain for unattended lines, whereas a blank drain code ships both semi-auto and manual options. If the downstream line must stay oil-free, omit the lubricator and choose a filter-regulator instead. The three units are separately orderable as GAF300-15, GAR300-15 and GAL300-15, meaning a clogged element does not require replacing the whole assembly. Stepping from this 3000 L/min envelope to the GAC200's 1750 L/min curve yields a 1.7x flow difference, providing a clear sizing step down for lighter duties.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This unit operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, the filtering grade is 40 um, and the recommended lubricant is ISO VG 32. It features a 60 cc drain bowl, a 98 cc oil bowl, and weighs 1300 g.
The N after the port in the model code indicates that no gauge is supplied from the factory. The body has a 1/8in gauge connection, allowing operators to add a compatible gauge if they need to visually monitor the 0.15-0.9 MPa set pressure.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.