verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAC300 · F.R.L. Combination (Filter + Regulator + Lubricator)

Airtac GAC F.R.L. Unit GAC30015ASNWT

The AirTAC GAC F.R.L. Unit GAC30015ASNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeF.R.L. combination
  • Port size1/2"
  • Pressure range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade5 µm
  • Bowl materialPC
  • Drainautomatic
  • Pressure gaugeNot fitted
  • Weight1300 g
$87.46 $94.96Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAC300-15 bowl, type and element option on one page All GAC300-15 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAC F.R.L. Unit GAC30015ASNWT

This GAC30015ASNWT is a three-unit F.R.L. combination - filter, regulator and lubricator - pre-assembled on a single L-shape bracket with quick mounting clamps, so there is no inter-unit tubing to leak. With a 1/2in port and a 1300 g mass, it belongs to the GAC300 size class and needs a proper panel or frame mount rather than support from the piping.

The 5 um element traps far finer particles than the standard 40 um grade, which suits precision valves or instrument air, though it will need more frequent element service. Pressure regulation spans 0.15-0.9 MPa (20-130 psi), and the automatic drain clears condensate from the 60 cc bowl without an operator, making it a strong fit for unattended or wet lines. The PC bowl is the standard build choice; confirm compatibility if the surroundings are aggressive, since the catalogue gives no solvent or impact data for it. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac GAC F.R.L. Unit GAC30015ASNWT Technical Specifications

ModelAirtac GAC F.R.L. Unit GAC30015ASNWT
SeriesGAC300 F.R.L. combination
Port size1/2" (NPT thread)
Filtering grade5 µm
Pressure range0.15 - 0.9 MPa (20 - 130 psi)
TypeStandard
Bowl materialPC
Drain typeAutomatic drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl60 cc
Capacity of oil bowl98 cc
Recommended lubricantISO VG 32 or equivalent
Weight1300 g

Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.

Model Code: Airtac GAC F.R.L. Unit GAC30015ASNWT

GAC300GA300 series F.R.L. unit — sets ports, bowl capacity and weight.
(blank)Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N).
15Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2".
ADrain: Automatic drain.
SStandard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L).
NNo pressure gauge; 1/8" gauge connection.
WFiltering grade 5 µm.
TNPT thread; gauge scale psi / bar.
(blank)No reverse-flow valve.

Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.

Size Class & Flow Envelope

  • GAC2001/8"-1/4" · 1750 L/min
  • GAC3001/4"-1/2" · 3000 L/min
  • GAC4003/8"-1/2" · 6000 L/min
  • GAC5003/4" · 7000 L/min
  • GAC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAC300 · 1/2" · curve to 3000 L/min
One size downGAC200
One size upGAC400 (curve to 6000 L/min)
Build orderFilter → bracket → regulator → lubricator

Where the Airtac GAC F.R.L. Unit GAC30015ASNWT Is Used

precision_manufacturing

Precision valve actuation

Feed a bank of 1/2in-port pneumatic valves on a packaging machine, where the 5 um element protects fine internal clearances from particle wear.

factory

Wet compressor lines

Mount on a ring main feeding a multi-station assembly line; the automatic drain clears condensate from the 60 cc bowl without scheduled operator visits.

engineering

Instrument air skids

Condition air for a test rig with sensitive pressure regulators, relying on the 0.15-0.9 MPa range to hold a stable setpoint for repeatable results.

Is the Airtac GAC F.R.L. Unit GAC30015ASNWT the Right Air-Prep Unit?

Choose the GAC300 body when 1/2in ports and a 1300 g unit are appropriate; the flow curve is plotted to 3000 L/min at 0.7 MPa inlet, which is about half the GAC400's 6000 L/min envelope if you need to size up. The automatic drain (A) is the right call for wet or unattended lines, while the blank drain option ships both semi-auto and manual drains. No gauge is supplied on this model, so the set pressure cannot be read without adding one - the gauge connection is 1/8in if fitted later. The 5 um element trades more frequent service for finer filtration, and the NPT thread carries a MPa/psi gauge scale. Spares are GAF300-15, GAR300-15 and GAL300-15, all sharing the same body-port suffix. Since the lubricator adds oil mist downstream of the regulator, choose a filter-regulator instead if the line must stay oil-free. With a 1.0 MPa maximum supply and a 0.9 MPa top setting, there is only about 0.1 MPa of regulation headroom, so plan a supply near 1.0 MPa if you truly need 0.9 MPa out.

Quick checklist

  • ✓ Body size for your peak flow (1/2" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 60 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 1300 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.

Airtac GAC F.R.L. Unit GAC30015ASNWT FAQ

It operates at 0.15-0.9 MPa (20-130 psi) with a 1.0 MPa (145 psi) maximum and a 1.5 MPa (215 psi) proof pressure. The temperature range is -5 to 70 C, the drain bowl holds 60 cc, the oil bowl holds 98 cc, and it weighs 1300 g. Recommended lubricant is ISO VG 32.

The N after the port code means no gauge is supplied. The body has a 1/8in gauge connection, so you can add a circular gauge later, but until then the outlet pressure cannot be read directly on the unit.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAC F.R.L. Unit GAC30015ASNWT

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAC30015ASNWT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.