
The AirTAC GAC F.R.L. Unit GAC30015ASWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for pneumatic systems, this AirTAC GAC30015ASWT combines a filter, regulator and lubricator on a single L-shape bracket. The 1/2in port serves mid-range duties, while the 5 um element captures far finer particulate than the standard 40 um grade, protecting precision valves and instrumentation. Air passes through the filter first, then the regulator sets the 0.15-0.9 MPa (20-130 psi) working pressure, and finally the lubricator introduces oil mist downstream so the regulator seat stays clean.
The automatic drain actively clears the 60 cc condensate bowl without an operator, which is decisive for unattended or wet lines. A circular gauge is fitted, reading MPa/psi for the default NPT thread, so technicians can verify the set pressure at a glance. Weighing 1300 g, the assembly needs a proper panel or frame mount rather than support from the tubing. If your process requires oil-free air downstream, omit the lubricator and choose a filter-regulator instead.
| Model | Airtac GAC F.R.L. Unit GAC30015ASWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds precision pneumatic tool changers where the 5 um element protects sensitive tooling cylinders from fine particulate ingress.
Conditions air for continuous packaging equipment, relying on the automatic drain to clear condensate during unattended shift operations.
Supplies regulated and lubricated air to multi-valve laboratory test benches requiring stable 1/2in flow and fine 5 um filtration.
Choose this mid-size 1/2in body when a machine demands exceptionally clean air, as the 5 um element traps finer particles than the standard 40 um option at the cost of more frequent element service. The automatic drain is paired here with a PC bowl, and the standard 0.15-0.9 MPa (20-130 psi) pressure type covers general plant duties. If you need to scale up, the GAC400 offers a 100 cc drain bowl and a flow envelope plotted to 6000 L/min at 0.7 MPa inlet, exactly double the 3000 L/min envelope of this GAC300. For maintenance, the three units are separately orderable as GAF300-15, GAR300-15 and GAL300-15. Because the maximum supply is 1.0 MPa and the standard type regulates to 0.9 MPa, there is only about 0.1 MPa of headroom above the top setting, so plan a supply near 1.0 MPa if you truly need 0.9 MPa out.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This model operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, the filtering grade is 5 um, the drain bowl holds 60 cc, the oil bowl holds 98 cc, the unit weighs 1300 g, and the recommended lubricant is ISO VG 32.
The 5 um element traps much finer particles than the standard 40 um filter, making it ideal for precision valves, but it requires more frequent replacement. The automatic drain clears the 60 cc condensate bowl without manual intervention, which is highly effective for wet lines or hard-to-access installations.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.