
The AirTAC GAC F.R.L. Unit GAC30015LNTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for pneumatic setups, this AirTAC GAC30015LNTK combines a filter, regulator and lubricator on a single L-shape bracket. The 1/2in port serves mid-range duties, while the lower-pressure type restricts the operating band to 0.15-0.4 MPa (20-58 psi). A 40 um element captures solid particles, and the assembly weighs 1300 g.
Because no gauge is supplied, operators must add one to the 1/8in gauge connection to read the set pressure. The sequence routes air through the filter first, then the regulator, adding oil mist last so the regulator seat stays clean. A reverse-flow (reflux) valve is fitted, which the catalogue shows as a separate pneumatic symbol with details on its own page. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC30015LNTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds small pneumatic grippers handling delicate electronics where a 0.4 MPa ceiling prevents crushing components.
Supplies oil-misted air to low-pressure bagging and sealing jaws that rely on soft, regulated actuation.
Conditions air for benchtop fluid dispensing valves requiring stable, low-pressure control under 0.4 MPa.
Choose this 1300 g assembly for 1/2in lines that need strict low-pressure control, knowing the L type tops out at 0.4 MPa. If the machine might ever need more, pick the standard S type instead. The PC bowl pairs with a semi-auto and manual drain pair, giving 60 cc of condensate capacity. Stepping up to the GAC400 body raises the drain bowl to 100 cc and the plotted flow envelope to 6000 L/min at 0.7 MPa inlet, compared to this unit's 3000 L/min curve. Remember that oil mist is added downstream, so choose a filter-regulator if the line must stay oil-free. Should a component fail, order GAF300-15, GAR300-15 or GAL300-15 spares. The 0.4 MPa ceiling is 44% of the standard 0.9 MPa limit, so verify your actuators can operate within this reduced band.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure unit operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It handles -5 to 70 C temperatures, uses a 60 cc drain bowl and a 98 cc oil bowl, takes ISO VG 32 lubricant, and weighs 1300 g.
The N in the model code means no gauge is supplied. You can fit a circular gauge to the 1/8in connection on the body, reading MPa/psi for the default NPT thread, to verify the downstream setpoint.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.