
The AirTAC GAC F.R.L. Unit GAC30015LT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, lubricated air at a precisely controlled low pressure, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. The 1/2in port serves mid-range pneumatics, while the 40 um element captures solid contaminants before they reach downstream valves. A circular gauge is fitted, reading MPa/psi for the default NPT thread, so operators can verify the setpoint visually.
Air passes through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream of the regulator seat to prevent fouling. The 0.15-0.4 MPa (20-58 psi) operating range targets sensitive actuators, and the 60 cc condensate bowl paired with a 98 cc oil reservoir sets the maintenance interval for this 1300 g assembly. Order code GAC30015LT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC30015LT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds delicate workholding fixtures on machining centers where standard 0.9 MPa air would crush thin-walled aluminum parts.
Prepares air for small heat-sealing jaws in packaging lines, supplying a steady 0.4 MPa to consistently bond thin films.
Conditions supply for sensitive pneumatic slides on analytical instruments, adding oil mist to protect moving bores from wear.
Choose this lower-pressure type for machines requiring a maximum of 0.4 MPa; if the application might ever need standard pressure up to 0.9 MPa, select the S type instead. The PC bowl is standard, but confirm material compatibility if the environment involves aggressive solvents. It ships with both a semi-auto drain, which dumps condensate on every pressure drop, and a manual drain for on-demand emptying. If the downstream line must remain completely oil-free, omit the lubricator and choose a separate filter-regulator. Replacement spares follow the body and port directly: GAF300-15, GAR300-15 and GAL300-15. Because the L type tops out at 0.4 MPa, it provides only 44% of the standard 0.9 MPa ceiling.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) and carries a max pressure of 1.0 MPa (145 psi) with a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, weighs 1300 g, and pairs a 60 cc drain bowl with a 98 cc oil bowl. The recommended lubricant is ISO VG 32.
It is fitted with both a semi-auto drain and a manual drain. The semi-auto mechanism expels condensate automatically whenever the supply pressure drops, while the manual option allows an operator to dump the 60 cc bowl on demand.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.