
The AirTAC GAC F.R.L. Unit GAC30015SNT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for mid-size pneumatics, this AirTAC F.R.L. combination pre-assembles a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. The 1/2in port serves the GAC300 body class, which carries a 60 cc condensate bowl and a 98 cc oil reservoir. Because the lubricator sits last in the airflow path, the oil mist is introduced downstream of the regulator seat, preventing fouling of internal components. This standard type operates at 0.15-0.9 MPa (20-130 psi) with a 40 um element, and the semi-auto drain pairs with a manual override to clear accumulated moisture.
Weighing 1300 g, the assembly requires a firm panel or frame mount rather than tubing support. This specific SKU omits the pressure gauge, though a 1/8in connection is provided on the body should operators wish to add instrumentation later. The catalogue flow curve for the GAC300 is plotted to 3000 L/min at 0.7 MPa inlet, giving a clear sizing envelope for evaluating real duty points. If a machine requires absolutely dry, oil-free air downstream, the lubricator must be omitted entirely and a dedicated filter-regulator selected instead. Order code GAC30015SNT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC30015SNT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds a bank of pneumatic screwdrivers and nutrunners on an automotive assembly line, supplying steady 0.6 MPa air with oil mist to keep air motors lubricated.
Conditions air for the folding arms and vacuum suction cups on automated packaging equipment, where the 60 cc drain bowl captures condensate from intermittent high-demand cycles.
Powers the pneumatic pop-up cylinders and sorting gates on a parcel distribution conveyor, relying on the 40 um element to protect valve spools from line debris.
Choose this mid-range 1/2in unit for typical factory air lines, stepping down to the GAC200 if your flow envelope fits within its 1750 L/min plotted curve, or up to the GAC400 which extends to 6000 L/min at 0.7 MPa inlet. This model uses a standard PC bowl and a semi-auto drain that dumps condensate on every pressure drop, backed by a manual override. The N in the ordering code means no gauge is supplied, so the set pressure cannot be read without adding one to the 1/8in port. Should you need finer protection for precision valves, the 5 um W element is the alternative to this 40 um standard filter. The three constituent parts are separately orderable as GAF300-15, GAR300-15 and GAL300-15, meaning a clogged filter element does not require replacing the whole assembly. The maximum supply is 1.0 MPa and the Standard type regulates to 0.9 MPa, leaving only about 0.1 MPa of headroom above the top setting, so plan a supply near 1.0 MPa if you truly need 0.9 MPa out.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit regulates from 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates in temperatures from -5 to 70 C, uses a 40 um element, and weighs 1300 g. The drain bowl holds 60 cc and the oil bowl holds 98 cc, requiring ISO VG 32 or equivalent lubricant.
No, the N at the end of the code indicates that no gauge is supplied. You can install your own gauge using the 1/8in connection on the body, but without adding one, the exact set pressure cannot be visually monitored.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.