
The AirTAC GAC F.R.L. Unit GAC30015SNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for mid-size pneumatics, this GAC30015SNWT assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/2in port pairs with a 5 um element to trap fine particles before they reach sensitive valves. Standard pressure control spans 0.15-0.9 MPa (20-130 psi), while the 60 cc condensate bowl and 98 cc oil sump set the maintenance rhythm.
Air routes through the filter first, then the regulator, and finally the lubricator so oil mist is added downstream of the regulator seat. Because the N follows the port, no gauge is supplied; operators can add one via the 1/8in gauge connection. The semi-auto and manual drain pair clears water on every pressure drop or on demand, and the 1300 g mass needs a firm frame mount rather than tubing support. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC30015SNWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds clean, oiled air at a stable pressure to tool changer cylinders, where the 5 um element protects close-tolerance moving parts from abrasive grit.
Conditions air for the pneumatic jaws and sealing bars on a vertical packaging line, ensuring consistent clamping force via the 0.15-0.9 MPa regulator.
Supplies metered oil mist to the reciprocating feeders of a stamping press, extending gripper life while the 60 cc drain bowl captures line condensate.
Choose this 1/2in PC bowl unit for mid-flow duties where 5 um filtration protects precision instruments. Stepping up to the GAC400 body raises the plotted flow envelope from 3000 to 6000 L/min at 0.7 MPa inlet, but doubles the weight to 2390 g. If your line must stay oil-free, omit the lubricator and choose a filter-regulator instead. Spares share the 300-15 suffix: GAF300-15, GAR300-15 and GAL300-15.
The 5 um element catches far finer grit than the 40 um standard, trading off more frequent element service for cleaner downstream air. Since max supply is 1.0 MPa and the Standard type regulates to 0.9 MPa, there is only about 0.1 MPa of headroom above the top setting.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This model operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 60 cc drain bowl, a 98 cc oil bowl, a 5 um element, and weighs 1300 g. Use ISO VG 32 or equivalent lubricant.
The N after the port code means no gauge is supplied from the factory. The body has a 1/8in gauge connection, so you can install your own circular gauge to read the set pressure. The default NPT thread sets the gauge scale to MPa/psi if one is added.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.