
The AirTAC GAC F.R.L. Unit GAC30015SWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air, the AirTAC GAC30015SWT is a three-unit F.R.L. combination pre-plumbed on a single L-shape bracket with quick mounting clamps. This assembly processes air through a 5 um filter, a pressure regulator and a lubricator in that exact sequence, ensuring oil mist is introduced downstream of the regulator seat to prevent fouling. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
The 5 um element grade traps far finer particles than the standard 40 um option, making it ideal for protecting precision valves and instrument air circuits, at the cost of more frequent element service. Condensate is managed by a semi-auto drain that dumps on each pressure drop alongside a manual drain, giving operators dual control over the 60 cc bowl. Weighing 1300 g, this body size is properly mounted to a panel or frame rather than supported by its tubing.
| Model | Airtac GAC F.R.L. Unit GAC30015SWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Supplies finely filtered 5 um air to pneumatic tool changing systems on machining centers where particulates would jam precision grippers.
Conditions air for the continuous motion actuators on vertical packaging equipment, adding necessary oil mist to high-speed moving parts.
Prepares supply air for sensitive pneumatic analytical instruments by removing fine contaminants before regulation.
Choose this GAC300 body for mid-scale duties, noting its flow curve is plotted to 3000 L/min at 0.7 MPa inlet, which is double the envelope of the smaller GAC200 at 1750 L/min. The PC bowl is standard for general machinery, while the semi-auto and manual drain pairing suits lines where an operator is present to monitor the 60 cc condensate level. If the downstream line must remain oil-free, omit the lubricator and choose a filter-regulator instead. Should a component fail, order the GAF300-15 filter, GAR300-15 regulator or GAL300-15 lubricator individually without replacing the whole bracket. Because the maximum supply is 1.0 MPa and the Standard type regulates to 0.9 MPa, there is only about 0.1 MPa of headroom above the top setting.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This unit operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It has a temperature range of -5 to 70 C, a 60 cc drain bowl, a 98 cc oil bowl, and weighs 1300 g. The recommended lubricant is ISO VG 32.
The W code specifies a 5 um filtering grade instead of the standard 40 um. This traps much finer particles, protecting precision valves and instrument air circuits, but the tighter mesh requires more frequent element service to maintain flow.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.