
The AirTAC GAC F.R.L. Unit GAC300C15ALNT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC GAC300C15ALNT F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/2in port pairs with a metal bowl and a 40 um element, while the lower-pressure type restricts the operating range to 0.15-0.4 MPa (20-58 psi). An automatic drain clears condensate without an operator, and no gauge is supplied from the factory.
Air passes through the filter first, then the regulator, before the lubricator adds oil mist downstream so the regulator seat stays clean. Weighing 1300 g, the assembly carries a 60 cc condensate bowl and a 98 cc oil reservoir. If the machine requires oil-free exhaust downstream, this unit must be omitted in favor of a dedicated filter-regulator, and the ambient temperature must stay between -5 to 70 C without freezing. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300C15ALNT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds sensitive looms and spinning frames where the 0.15-0.4 MPa range prevents damage to delicate fibers while the automatic drain handles humid plant air.
Conditions air for low-force sealing jaws and forming tubes that rely on steady, low-pressure actuation rather than high clamping force.
Supplies regulated and lubricated air to benchtop analytical devices, with the metal bowl offering solvent resistance in chemical-heavy lab environments.
Choose this metal-bowl configuration for harsher environments where standard PC bowls might not hold up, keeping in mind the 1.0 MPa maximum pressure and -5 to 70 C limits apply equally to all bowl materials. The automatic drain is decisive for unattended or wet lines, emptying the 60 cc bowl continuously rather than relying on a manual operator. Because the code includes an N after the port, no pressure gauge is fitted; the 1/8in gauge connection allows adding one later, though the set pressure cannot be read without it. The NPT thread sets a MPa/psi scale if a gauge is installed. If the line must stay completely oil-free, select a filter-regulator instead of this assembly, and note the spares path uses GAF300-15, GAR300-15 and GAL300-15. The 0.15-0.4 MPa lower-pressure ceiling is 44% of the standard 0.9 MPa limit, so verify your machine never needs higher pressure before choosing this L type.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) and has a maximum pressure of 1.0 MPa (145 psi) with a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, uses a 40 um element, weighs 1300 g, holds 60 cc of condensate and 98 cc of oil, and requires ISO VG 32 lubricant.
The N after the port code means no gauge is supplied, though you can add one to the 1/8in connection; the NPT thread dictates a MPa/psi scale. The L type indicates a lower-pressure regulator capped at 0.4 MPa, making it unsuitable for systems that might ever require more than 58 psi.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.