
The AirTAC GAC F.R.L. Unit GAC300C15ALT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, lubricated and precisely metered air, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. The 1/2in port serves mid-range pneumatics, while the 0.15-0.4 MPa (20-58 psi) lower-pressure type targets sensitive circuits. A 40 um element captures particulates before a metal bowl collects condensate.
Air passes through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat stays clean. The automatic drain clears the 60 cc condensate bowl without an operator, and the fitted circular gauge reads MPa/psi for the default NPT thread. If your downstream line must remain oil-free, omit the lubricator and choose a filter-regulator instead. Order code GAC300C15ALT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300C15ALT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds sensitive weaving actuators operating safely within the 0.15-0.4 MPa band, adding necessary oil mist for high-speed shuttle movement.
Conditions air for delicate film-handling grippers where a 1/2in port and 40 um filtration prevent particulate jams on the packaging line.
Regulates low-pressure test chambers using the fitted gauge to verify MPa/psi settings, while the metal bowl withstands varied lab solvents.
Choose this metal-bowl configuration for rugged environments where a standard PC bowl might not survive, keeping in mind the shared 1.0 MPa maximum and -5 to 70 C operating limits apply to all bowl materials. The automatic drain suits unattended stations, whereas a blank drain code provides semi-auto and manual options. The 5 um element (W code) is available for finer filtration needs, and replacement parts follow the GAF300-15, GAR300-15 and GAL300-15 designations. The catalogue flow curve for the GAC300 is plotted to 3000 L/min at 0.7 MPa inlet, offering half the envelope of the GAC400's 6000 L/min capacity. Because the lower-pressure type tops out at 0.4 MPa, it provides only 44% of the standard 0.9 MPa ceiling.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It has a 1/2in port, a 60 cc drain bowl, a 98 cc oil bowl, a 40 um element, and weighs 1300 g. The temperature range is -5 to 70 C, and the recommended lubricant is ISO VG 32.
The automatic drain empties the 60 cc condensate bowl whenever accumulation reaches a threshold, requiring no manual intervention. The metal bowl provides a durable housing option, sharing the exact same 1.0 MPa pressure limit as the PC and nylon alternatives.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.