
The AirTAC GAC F.R.L. Unit GAC300C15ALTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this GAC300C15ALTK assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/2in port pairs with a 40 um element, while the lower-pressure type governs output between 0.15-0.4 MPa (20-58 psi). A circular gauge reading MPa/psi is fitted for the default NPT thread, and the metal bowl equips the unit for rugged plant environments.
Air passes through the filter, regulator and lubricator in that exact sequence, ensuring oil mist is added downstream so the regulator seat never fouls. The automatic drain clears condensate from the 60 cc bowl without an operator, which reduces routine maintenance on wet lines. This model also carries a reverse-flow (reflux) valve, which the catalogue depicts as a separate pneumatic symbol with details on its own page.
| Model | Airtac GAC F.R.L. Unit GAC300C15ALTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds sensitive weaving actuators requiring a stable 0.3 MPa supply, using the 40 um element to protect fine yarn guides from particulate.
Conditions air for pneumatic sealing jaws operating under 0.4 MPa, relying on the automatic drain to handle condensate during long production runs.
Regulates low-pressure air for chemical metering pumps, where the metal bowl provides durability against incidental solvent splashes.
Choose this 1300 g assembly when a machine requires low-pressure control, as the L type tops out at 0.4 MPa; if the application may ever demand more, select the standard S type instead. The 60 cc condensate bowl and 98 cc oil sump dictate the intervention frequency, offering a balance between the smaller GAC200 and the 100 cc bowl of the GAC400. Because the lubricator introduces oil mist, choose a filter-regulator if the line must remain strictly oil-free. Should the element clog or bowl crack, order the GAF300-15, GAR300-15 and GAL300-15 spares rather than replacing the whole unit. Keep in mind the L type ceiling is 44% of the standard 0.9 MPa maximum.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 1300 g, features a 60 cc drain bowl and a 98 cc oil bowl, and uses ISO VG 32 lubricant.
The K indicates a reverse-flow (reflux) valve is fitted. The catalogue shows this as a separate pneumatic symbol with details on its own page, representing an ordering difference for specific circuit requirements.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.