verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAC300 · F.R.L. Combination (Filter + Regulator + Lubricator)

Airtac GAC F.R.L. Unit GAC300C15ASNWT

The AirTAC GAC F.R.L. Unit GAC300C15ASNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeF.R.L. combination
  • Port size1/2"
  • Pressure range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade5 µm
  • Bowl materialMetal
  • Drainautomatic
  • Pressure gaugeNot fitted
  • Weight1300 g
$96.18 $103.68Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAC300-15 bowl, type and element option on one page All GAC300-15 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAC F.R.L. Unit GAC300C15ASNWT

Delivering cleaned, pressure-set and oil-misted air for mid-size pneumatic setups, this AirTAC F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket with quick clamps. The 1/2in ported body operates at 0.15-0.9 MPa (20-130 psi) and uses a 5 um element to trap fine particulate before it reaches precision valves. Because the metal bowl is fitted with an automatic drain, condensate is purged without an operator attending the 60 cc bowl.

Air travels through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat stays clean. Weighing 1300 g, the assembly is built for panel or frame mounting rather than tubing support. No gauge is supplied, but a 1/8in connection is provided if you need to add one to read the set pressure. Order code GAC300C15ASNWT has NPT ports (the T in the code) for North American pipe fittings.

Airtac GAC F.R.L. Unit GAC300C15ASNWT Technical Specifications

ModelAirtac GAC F.R.L. Unit GAC300C15ASNWT
SeriesGAC300 F.R.L. combination
Port size1/2" (NPT thread)
Filtering grade5 µm
Pressure range0.15 - 0.9 MPa (20 - 130 psi)
TypeStandard
Bowl materialMetal
Drain typeAutomatic drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl60 cc
Capacity of oil bowl98 cc
Recommended lubricantISO VG 32 or equivalent
Weight1300 g

Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.

Model Code: Airtac GAC F.R.L. Unit GAC300C15ASNWT

GAC300GA300 series F.R.L. unit — sets ports, bowl capacity and weight.
CBowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N).
15Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2".
ADrain: Automatic drain.
SStandard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L).
NNo pressure gauge; 1/8" gauge connection.
WFiltering grade 5 µm.
TNPT thread; gauge scale psi / bar.
(blank)No reverse-flow valve.

Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.

Size Class & Flow Envelope

  • GAC2001/8"-1/4" · 1750 L/min
  • GAC3001/4"-1/2" · 3000 L/min
  • GAC4003/8"-1/2" · 6000 L/min
  • GAC5003/4" · 7000 L/min
  • GAC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAC300 · 1/2" · curve to 3000 L/min
One size downGAC200
One size upGAC400 (curve to 6000 L/min)
Build orderFilter → bracket → regulator → lubricator

Where the Airtac GAC F.R.L. Unit GAC300C15ASNWT Is Used

precision_manufacturing

CNC Tool Changers

Feeds clean, lubricated air at a stable pressure to tool changer cylinders on machining centers, protecting tight-tolerance moving parts from particulate.

package_2

Form Fill Seal Machines

Conditions air for the pneumatic sealing jaws and film pullers in continuous packaging lines, where the automatic drain handles moisture from high duty cycles.

factory

Stamping Press Feeders

Supplies metered oil mist and regulated pressure to the pneumatic feeders on progressive stamping lines, preventing premature cylinder wear.

Is the Airtac GAC F.R.L. Unit GAC300C15ASNWT the Right Air-Prep Unit?

Choose this GAC300 size class when a 1/2in port is required and the catalogue flow curve plotted to 3000 L/min at 0.7 MPa inlet suits the duty point, stepping up from the GAC200's 1750 L/min envelope. The 5 um W element catches far finer particles than the standard 40 um grade, trading slightly more frequent element service for better protection of sensitive instruments. The metal bowl handles harsher industrial environments than standard PC, and the automatic drain clears water on every pressure cycle without manual intervention. If the downstream line must stay oil-free, omit the lubricator and choose a filter-regulator instead. Spares are ordered individually as GAF300-15, GAR300-15 and GAL300-15. Stepping up to the GAC400 yields a 100 cc drain bowl, which is roughly 1.7x the condensate capacity of this 60 cc bowl, meaning fewer service interventions on wet lines.

Quick checklist

  • ✓ Body size for your peak flow (1/2" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 60 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 1300 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.

Airtac GAC F.R.L. Unit GAC300C15ASNWT FAQ

This standard type unit regulates from 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates in temperatures from -5 to 70 C, uses a 5 um element, and weighs 1300 g. The metal drain bowl holds 60 cc while the oil bowl holds 98 cc, and the recommended lubricant is ISO VG 32.

No, the N in the code means no gauge is supplied. However, the body features a 1/8in gauge connection, allowing you to install a separate pressure gauge if you need to monitor the 0.15-0.9 MPa operating range.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAC F.R.L. Unit GAC300C15ASNWT

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAC300C15ASNWT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.