
The AirTAC GAC F.R.L. Unit GAC300C15AST is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for pneumatics, this AirTAC GAC300C15AST combines a filter, regulator and lubricator on a single L-shape bracket. The 1/2in port pairs with a 40 um element and a standard 0.15-0.9 MPa (20-130 psi) pressure range. A circular gauge is fitted, reading MPa/psi for the default NPT thread. Because the build order passes air through the filter before the regulator, and adds oil mist last, the regulator seat stays clean.
Weighing 1300 g, this unit uses a robust metal bowl paired with an automatic drain that clears condensate without an operator. The 60 cc drain bowl and 98 cc oil reservoir dictate the maintenance interval. It operates from -5 to 70 C and carries a 1.0 MPa (145 psi) maximum pressure. If your machine requires oil-free output downstream, omit the lubricator and choose a dedicated filter-regulator instead.
| Model | Airtac GAC F.R.L. Unit GAC300C15AST |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds a multi-station pneumatic manifold on an automotive assembly line, providing steady 0.6 MPa air and oil mist to downstream pick-and-place cylinders.
Prepares air for a continuous motion case erector, ensuring the 1/2in port delivers enough volume without pressure drop to the folding arms and glue guns.
Conditions air for heavy-duty diverters on a parcel sorting conveyor, where the automatic drain handles condensate from high-duty cycling without manual intervention.
This 1/2in ported unit sits in the middle of the GAC size range. Stepping up to the GAC400 body increases the condensate bowl from 60 cc to 100 cc, while dropping to the GAC200 reduces the oil reservoir to 36 cc. The metal bowl on this variant suits harsher industrial settings compared to the standard PC or optional nylon bowls. An automatic drain is fitted, which is decisive for unattended or wet lines, whereas blank drain codes ship with both semi-auto and manual options. The 40 um element is standard, trapping typical pipe scale, while a 5 um W-code element catches finer particles for precision valves at the cost of more frequent element service. Spares are separately orderable as GAF300-15, GAR300-15 and GAL300-15. Max supply is 1.0 MPa and the Standard type regulates to 0.9 MPa, so there is only about 0.1 MPa of headroom above the top setting.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
The standard pressure range is 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates in temperatures from -5 to 70 C. The drain bowl holds 60 cc and the oil bowl holds 98 cc, with a total weight of 1300 g. The recommended lubricant is ISO VG 32.
The metal bowl provides a rigid housing rated for the same 1.0 MPa maximum as the PC and nylon options, making it suitable for demanding environments. The automatic drain (coded A) actively expels accumulated condensate from the 60 cc bowl whenever pressure drops, removing the need for an operator to manually empty it on a daily route.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.