
The AirTAC GAC F.R.L. Unit GAC300C15LNT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for pneumatic setups, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. The GAC300C15LNT features a 1/2in port and uses a 40 um element to strip moisture and solid particles before the regulator sets a stable downstream pressure. Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of the internal mechanism.
Configured for low-pressure duties, this standard element variant operates from 0.15-0.4 MPa (20-58 psi). It carries a metal bowl and omits the pressure gauge, leaving a 1/8in gauge connection for operators to add their own indicator if required. The 1300 g assembly includes a 60 cc condensate bowl and a 98 cc oil reservoir, both of which dictate how frequently a technician must attend to the unit during routine maintenance rounds. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300C15LNT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds delicate pneumatic clamps on machining centers where output must stay below 0.4 MPa to avoid crushing thin-walled aluminum components.
Conditions air for small pick-and-place actuators in cardboard boxing machines, adding the required oil mist for high-speed moving seals.
Prepares supply air for sensitive lab test benches, utilizing the metal bowl for durability against accidental impacts in shared workspaces.
Choose this specific configuration when a machine requires a maximum operating ceiling of 0.4 MPa, as the lower-pressure type limits output to prevent over-pressurization of sensitive downstream components. If the equipment might ever demand more than 0.4 MPa, the L type is the wrong part and a standard S type should be selected instead. The metal bowl offers a robust housing choice for demanding industrial environments, while the semi-auto and manual drain pairing gives operators two distinct methods for clearing the 60 cc condensate sump. Since no gauge is supplied, the set pressure cannot be read without adding one to the 1/8in connection.
For maintenance, the assembly accepts its own AirTAC GAF300-15, GAR300-15 and GAL300-15 replacement units, meaning a clogged element or damaged bowl does not require replacing the whole combination. If the downstream line must remain completely oil-free, the lubricator must be omitted entirely and a standalone filter-regulator chosen instead. Stepping up from this body, the GAC400 plots a flow envelope to 6000 L/min at 0.7 MPa inlet, exactly double the 3000 L/min envelope of the GAC300. However, selecting the L type means the 0.4 MPa ceiling is just 44% of the 0.9 MPa maximum offered by the standard S type.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure unit regulates air from 0.15-0.4 MPa (20-58 psi) and has a maximum pressure of 1.0 MPa (145 psi) with a proof pressure of 1.5 MPa (215 psi). It operates in temperatures from -5 to 70 C, uses a 40 um element, holds 60 cc of condensate and 98 cc of oil, weighs 1300 g, and requires ISO VG 32 lubricant.
The N in the model code indicates no gauge is supplied, leaving a 1/8in gauge connection open on the body. Operators must install their own gauge to read the set pressure, allowing facilities to standardize on a specific dial scale or digital reader that matches their existing equipment.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.