
The AirTAC GAC F.R.L. Unit GAC300C15LT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/2" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC GAC300C15LT pre-assembles a filter, regulator and lubricator on a single L-shape bracket. The 1/2in port pairs with a robust metal bowl, while the standard 40 um element captures solid particulates before they reach sensitive valves. Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of the pressure-control mechanism.
This lower-pressure variant operates within a 0.15-0.4 MPa (20-58 psi) range, making it suitable for low-force actuator circuits rather than general factory headers. A circular gauge is fitted, reading MPa/psi for the default NPT thread, so operators can monitor the set pressure directly at the unit. The assembly weighs 1300 g, requiring a solid panel or frame mount rather than support from the piping itself.
| Model | Airtac GAC F.R.L. Unit GAC300C15LT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-15 filter, GAR300-15 regulator, GAL300-15 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/2" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds delicate pneumatic grippers handling electronics, where exceeding 0.4 MPa would crush fragile components.
Conditions air for low-pressure loom and knitting cylinders, providing steady oil mist to moving rapiers.
Supplies regulated air to low-pressure test fixtures and actuated valves in analytical equipment benches.
Choose this specific configuration when a machine circuit demands a strict 0.15-0.4 MPa ceiling instead of the standard 0.9 MPa upper limit, ensuring low-pressure cylinders cannot be over-driven. The metal bowl offers durability for harsher industrial settings compared to the standard PC or optional nylon variants. If the application requires completely oil-free output downstream, this lubricator must be omitted entirely and a dedicated filter-regulator selected instead. Should a component fail, the assembly breaks down into separately orderable spares: GAF300-15, GAR300-15 and GAL300-15. Stepping up to the GAC400 body increases the condensate sump from 60 cc to 100 cc, whereas dropping to the GAC200 reduces the flow envelope from 3000 L/min down to 1750 L/min at 0.7 MPa inlet. Choosing the L type restricts the top setting to 44% of the standard 0.9 MPa ceiling.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This unit regulates from 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 1300 g, features a 60 cc drain bowl, a 98 cc oil bowl, and uses ISO VG 32 lubricant.
It ships with both a semi-auto and a manual drain fitted to the metal bowl; the semi-auto dumps condensate on each pressure drop, while the manual operates on demand. A circular gauge is included, reading in MPa/psi to match the default NPT thread.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.